Norgren 102670628 Swivel Tee Adapter Bspp 1/4 in

Product Description

The NORGREN 102670628 is a push-to-connect swivel tee adapter fitting configured in a tube-to-male-to-tube-to-male BSPP arrangement. It accepts a 6 mm outside diameter tube and connects to a 1/4 inch BSPP male thread, allowing a tee branch off a pneumatic or fluid line without the need for additional tools on the tube side. The fitting is constructed from nickel-plated brass and is rated to a maximum working pressure of 260 psi. The built-in swivel function allows the male thread end to rotate during installation, reducing stress on connected lines. Licensed plumbers, pipefitters, and pneumatic system technicians install this type of fitting in general-purpose fluid and air distribution assemblies.

This fitting is suited for general-purpose pneumatic and fluid handling applications in both light industrial and commercial settings. The push-to-connect mechanism accommodates 6 mm OD tubing, making it compatible with metric tube runs commonly found in pneumatic control panels, instrumentation lines, and compressed air distribution systems. The BSPP male thread end allows direct connection to standard British Standard Parallel Pipe ported components. The fitting is rated for service between 0 degrees F and 175 degrees F, covering most ambient and light-duty process temperature ranges.

Key Features

• Push-to-connect design accepts 6 mm OD tubing without tools or ferrules
• Swivel male BSPP thread end reduces installation torque on connected components
• Nickel-plated brass construction for corrosion resistance in general-purpose environments
• 260 psi maximum working pressure rating
• Nitrile O-ring seal material for compatibility with common pneumatic and hydraulic media
• Tee configuration enables a single inline tap for branching or instrumentation connections

Compatibility

Designed for general-purpose pneumatic and fluid systems using 6 mm OD tubing and 1/4 inch BSPP male-ported components. Suitable for use where BSPP thread standards are specified.

Installation Notes

Installation of push-to-connect fittings should be performed by a qualified plumber, pipefitter, or pneumatic systems technician. Depressurize and bleed the system fully before removing or installing any fittings. Confirm that tubing OD is within manufacturer tolerance and that cut ends are clean, square, and free of burrs before inserting into the push-to-connect port. Verify BSPP thread compatibility at the mating port before applying torque to the swivel end.