Norgren 102260618 Push-to-connect Female Adapter Bspp

Product Description

The NORGREN 102260618 is a straight push-to-connect female adapter tube fitting designed for general-purpose pneumatic and fluid line assemblies. Built from nickel-plated brass, this fitting accepts a 6 mm outside diameter tube on each end and terminates with a 1/8 inch BSPP female thread connection. It handles a maximum working pressure of 260 psi and performs across a temperature range of 0 to 175 degrees F. The nitrile o-ring provides a reliable seal under typical shop-air and light fluid service conditions. Plumbers, pipefitters, and pneumatic system technicians install this fitting where a quick tube connection to a female-threaded port is required.

This fitting suits general-purpose pneumatic plumbing in industrial and light commercial environments. It connects push-to-connect tubing directly to female BSPP-threaded ports on valves, manifolds, cylinders, or instrumentation. The straight configuration is used where inline tube-to-port connections are needed without offset or angular routing. Its compact overall length of approximately 1.02 inches keeps installations tight in confined panel or manifold spaces.

Key Features

• Push-to-connect tube ends for tool-free tube insertion and positive retention
• 1/8 inch BSPP female thread matches parallel-thread British Standard ports
• Nickel-plated brass body resists corrosion in air and light fluid service
• Nitrile o-ring seal rated for 0 to 175 degrees F operating range
• Rated to 260 psi maximum working pressure
• Straight inline configuration for direct port connections

Compatibility

Designed for use with 6 mm outside diameter push-to-connect tubing and equipment fitted with 1/8 inch BSPP female-threaded ports in general-purpose pneumatic and fluid systems.

Installation Notes

Depressurize and de-energize the system completely before removing or installing any fittings. Ensure the tube end is cut cleanly and squarely with no burrs before inserting into the push-to-connect collet. Hand-tighten the BSPP thread connection and verify seating of the o-ring against the port face before pressurizing. Verify that the tubing material and system fluid are compatible with nitrile o-ring elastomer before placing the fitting in service.