Norgren 101470528 90 Swivel Elbow Bspt Fitting 260 Psi

Product Description

The NORGREN 101470528 is a 90-degree swivel elbow push-to-connect tube fitting with a male BSPT thread end. It connects pneumatic or fluid tubing to male BSPT threaded ports, allowing a right-angle directional change in the line. The swivel elbow design permits post-installation rotation of the tube entry point, which simplifies routing and reduces stress on tubing runs. Built from nickel-plated brass, the fitting handles a maximum working pressure of 260 psi and is rated for use across a temperature range of 0 to 175 degrees F. The nitrile O-ring provides a reliable seal under typical pneumatic and general-purpose fluid system conditions. This fitting is installed by plumbers, pipefitters, and pneumatic system technicians.

This fitting suits general-purpose pneumatic tubing systems in light industrial, commercial, and mechanical service applications. The push-to-connect tube entry accepts 5 mm outside diameter tubing, while the male BSPT threaded end connects directly to BSPT-threaded ports on valves, manifolds, cylinders, or equipment housings. The swivel elbow configuration is particularly useful where tubing must exit at a controlled angle from a fixed port and where panel space or tight routing is a concern.

Key Features

• 90-degree swivel elbow allows post-installation tube-angle adjustment
• Push-to-connect tube entry for fast, tool-free tube insertion
• Male BSPT threaded end for direct port connection
• Nickel-plated brass construction for corrosion resistance
• Nitrile O-ring seal rated for general-purpose fluid and pneumatic media
• Rated to 260 psi maximum working pressure
• Operating temperature range of 0 to 175 degrees F

Compatibility

Designed for general-purpose pneumatic and fluid systems using 5 mm outside diameter tubing and male BSPT threaded ports. Suitable for use with standard push-to-connect compatible tubing in light industrial and commercial mechanical systems.

Installation Notes

Installation is performed by a qualified pipefitter, plumber, or pneumatic systems technician. Depressurize and isolate the system completely before removing any existing fittings or installing this component. Ensure the mating BSPT threaded port is clean and free of debris before threading the fitting; apply appropriate thread sealant compatible with the system media. Insert tubing squarely into the push-to-connect end until it seats fully, and verify a secure connection by pulling back lightly on the tubing before returning the system to pressure.