Nordic Pure Merv 14 Plus Carbon Furnace Filter 6 Pack

Product Description

The NORDIC PURE 17_1/4x19_1/4x1ExactCustomM14+C-6 is a custom-made, pleated MERV 14 plus carbon air filter designed for residential and light commercial AC and furnace systems. Cut to exact dimensions of 17.25 x 19.25 x 0.75 inches, this filter combines high-efficiency mechanical filtration with an activated carbon layer to address both particulate capture and odor reduction. At MERV 14, it captures over 90% of airborne particles between 1 and 10 microns and 75% to 95% of particles between 0.3 and 1 micron. Licensed HVAC technicians and informed homeowners install this filter as a direct fit in systems requiring non-standard filter sizing.

This filter is suited for residential and light commercial forced-air HVAC systems where a standard nominal size does not fit the filter cabinet. The exact 17.25 x 19.25 x 0.75 inch actual size makes it appropriate for equipment with unusually dimensioned filter tracks. Because it is hand-fabricated to these precise measurements, it is manufactured to order. Nordic Pure builds the filter by cutting down or combining standard 1-inch filter frames, using a reinforced 2-part frame construction and tape as needed depending on the custom dimensions. The carbon layer provides supplemental odor control alongside the MERV 14 mechanical filtration media.

Key Features

• MERV 14 filtration captures over 90% of particles from 1 to 10 microns, including dust, pollen, pet dander, mold spores, smoke, and bacteria
• Activated carbon layer reduces common household odors including smoke and smog
• Reinforced 2-part frame construction supports balanced airflow and structural durability over filter life
• Custom-fabricated to exact actual dimensions of 17.25 x 19.25 x 0.75 inches for non-standard filter openings
• Sold in a 6-pack; recommended replacement interval of 30 to 90 days for 1-inch filters depending on environment
• Made in the USA

Compatibility

Designed as a custom exact-fit replacement for residential and light commercial forced-air AC and furnace systems requiring an actual filter size of 17.25 x 19.25 x 0.75 inches. Verify the actual dimensions of the existing filter before ordering, as this is a non-returnable custom-made product.

Installation Notes

Installation is performed by licensed HVAC technicians or qualified service personnel. Power down or set the thermostat to the off position before replacing the filter to prevent the blower from drawing in an unseated filter. Confirm the actual opening dimensions with a tape measure before ordering, as the actual size should be within 0.125 inches of the filter dimensions. Insert the filter with the airflow arrow on the frame pointing toward the blower and away from the return air duct.