Nordic Pure Merv 12 Plus Carbon Filter 16x22.25x0.75 6 Pack

Product Description

The NORDIC PURE 16x22_1/4x1ExactCustomM12+C-6 is a custom-cut, pleated carbon air filter rated MERV 12 with activated carbon media, built to exact dimensions for residential and light commercial HVAC systems. At an actual size of 16 x 22.25 x 0.75 inches, this filter ships as a six-pack and is hand-fabricated to the fraction of an inch specified at the time of order. The MERV 12 rating means it captures over 90 percent of airborne particles between 3 and 10 microns, and between 80 and 90 percent of particles between 1 and 3 microns. The carbon layer addresses odors and gaseous contaminants alongside the standard particulate filtration. HVAC technicians and homeowners install this filter in furnaces and air handlers where a standard nominal size does not fit the existing filter rack.

This filter is sized for applications where no standard off-the-shelf nominal size is available. It is suited for residential forced-air furnaces, central air conditioning systems, and air handlers that require a 16 x 22.25 x 0.75 inch filter. Because the filter is custom-fabricated by cutting down or combining standard filter frames, the construction may incorporate tape at joints depending on the final dimensions. Replacement intervals for one-inch filters of this type are typically every 30 to 90 days, depending on household dust load, pets, and local air quality conditions.

Key Features

• MERV 12 rating captures over 90 percent of particles between 3 and 10 microns, and 80 to 90 percent between 1 and 3 microns, including pollen, pet dander, mold spores, smoke, bacteria, and fine dust
• Activated carbon layer reduces odors and gaseous airborne contaminants
• Reinforced two-part frame provides added structural rigidity and supports consistent airflow across the filter face
• Hand-fabricated to exact dimensions - actual size 16 x 22.25 x 0.75 inches - for filter racks that do not accept standard nominal sizes
• Six filters included per order, extending service intervals between purchasing cycles
• Made in the USA

Compatibility

Designed as a custom exact-fit replacement for residential and light commercial forced-air furnaces and central air conditioning systems requiring a filter with an actual size of 16 x 22.25 x 0.75 inches. Measure the existing filter before ordering - custom sizes are not interchangeable with standard nominal sizes.

Installation Notes

Installation is performed by HVAC technicians or qualified service personnel. Power down the furnace or air handler at the disconnect or thermostat before removing the old filter. Insert the new filter with the airflow arrow on the frame pointing toward the blower. Because this is a custom-fabricated size, confirm actual filter opening measurements to the nearest one-eighth of an inch before ordering, as custom filters are non-returnable.