Nordic Pure 8x30x1CustomM8+C-6 Merv 8 Carbon Filter 6pk

Product Description

The NORDIC PURE 8x30x1CustomM8+C-6 is a custom-cut, pleated AC and furnace air filter rated MERV 8 with an integrated carbon layer. It uses electrostatically charged synthetic media to capture airborne particulates while the carbon component helps reduce common household odors. This filter fits residential and light-commercial HVAC systems and is installed by HVAC technicians or knowledgeable property owners performing routine filter maintenance. The actual dimensions are 7.5 x 29.5 x 0.75 inches, slightly smaller than the nominal 8 x 30 x 1 inch listing, which is standard for the industry. Each box contains 6 filters.

This filter is suited for residential forced-air heating and cooling systems where both particulate capture and odor reduction are priorities. The MERV 8 rating targets particles between 3 and 10 microns, making it effective against lint, household dust, pollen, pet dander, mold spores, and similar contaminants. The carbon media layer addresses common airborne odors. Because this is a custom-fabricated size, it is manufactured by cutting or combining standard filter frames to match the listed nominal dimensions. Custom sizing is appropriate when no standard nominal size fits the existing filter slot.

Key Features

• MERV 8 rating captures 70 to 85 percent of airborne particles between 3 and 10 microns
• Integrated carbon layer reduces common household odors alongside particulate filtration
• Electrostatically charged synthetic pleated media for low airflow resistance
• Reinforced 2-part frame construction for added durability and structural support
• Custom-fabricated to nominal 8 x 30 x 1 inch dimensions with actual size 7.5 x 29.5 x 0.75 inches
• Made in the USA; pack of 6 filters

Compatibility

Designed as a custom-size OEM-style replacement for residential and light-commercial forced-air HVAC systems requiring a nominal 8 x 30 x 1 inch filter slot. Measure the actual opening before ordering, as this is a non-returnable custom size.

Installation Notes

Power down or set the thermostat to off before replacing a furnace or air handler filter. Confirm the actual filter slot dimensions with a tape measure prior to ordering a custom size; the actual filter should fit within 0.125 inches of the slot opening on each side. Install with the airflow arrow on the filter frame pointing toward the blower. NORD PURE recommends replacing this filter every 30 to 90 days depending on household conditions and usage.