Nordic Pure 8x24x1ExactCustomM12+C-12 Merv 12 Filter 12pk

Product Description

The NORDIC PURE 8x24x1ExactCustomM12+C-12 is a custom-cut, pleated AC and furnace air filter rated MERV 12 with an activated carbon layer. It measures 8 x 24 x 0.75 inches actual size, fitting slots nominally labeled 8x24x1. The electrostatically charged synthetic filter media captures particles down to 1 micron, while the carbon layer addresses odors and gaseous contaminants. Sold in a 12-pack, this filter is manufactured in the USA and designed for HVAC technicians, building maintenance professionals, and knowledgeable end users who need a non-standard size with higher-efficiency filtration performance.

This filter is suited for residential and light commercial HVAC applications where a standard nominal size does not fit the filter housing. The 8x24x1 nominal slot is an uncommon dimension, making this a custom-fabricated unit. It is appropriate for forced-air gas furnaces, air handlers, and central AC systems requiring a 1-inch-depth filter with enhanced particle and odor control. The MERV 12 rating makes it a practical upgrade over fiberglass or low-MERV poly filters in environments with pets, allergy concerns, or elevated dust loads.

Key Features

• MERV 12 rating captures over 90% of airborne particles between 3-10 microns and 80%-90% of particles between 1-3 microns, including pollen, mold spores, pet dander, smoke, bacteria, and fine dust
• Activated carbon layer reduces common household odors and gaseous contaminants
• Electrostatically charged synthetic media attracts and holds particulates without significantly restricting airflow
• Reinforced 2-part frame construction provides added structural durability for custom-cut sizes
• Actual size of 8 x 24 x 0.75 inches ensures a precise fit in nominally sized 8x24x1 housings
• Made in the USA; sold in a 12-pack for extended service coverage

Compatibility

Custom-fabricated to exact dimensions for HVAC systems requiring a nominal 8x24x1 filter slot. Actual dimensions are 8 x 24 x 0.75 inches. Verify your existing filter housing measurements before ordering, as this custom size is non-returnable. Fits forced-air furnaces and air handlers with a 1-inch-depth filter rack accepting this non-standard nominal width and length.

Installation Notes

Installation is performed by HVAC technicians or qualified maintenance personnel. Always power down the furnace or air handler at the thermostat and disconnect electrical power at the breaker before replacing the filter. Confirm airflow direction arrow on the filter frame aligns with the direction of airflow toward the blower. Because this is a custom size, measure the existing filter or housing opening carefully before installation to confirm fit; a gap larger than 0.125 inches on any side can allow unfiltered air bypass.