Nordic Pure 6x30x1ExactCustomM8+C-6 Merv 8 Plus Carbon Filter

Product Description

The NORDIC PURE 6x30x1ExactCustomM8+C-6 is a custom-made, pleated MERV 8 Plus Carbon air filter designed for residential and light commercial HVAC systems including forced-air furnaces and central air conditioning units. Each filter is hand-fabricated to the exact dimensions specified at the time of order, with an actual size of 6 x 30 x 0.75 inches. The activated carbon layer addresses common household odors while the MERV 8 media captures 70 to 85 percent of airborne particles between 3 and 10 microns, including dust, pollen, pet dander, lint, and mold spores. This pack includes 6 filters. Installation and replacement are typically handled by HVAC technicians or knowledgeable homeowners.

This filter is intended for standard 1-inch filter slots in residential furnaces and air handlers where a non-standard opening requires a custom exact-size solution. The nominal size is 6x30x1 with an actual size of 6 x 30 x 0.75 inches. Because the filter is custom-made to dimensions entered at order, it is critical to measure the existing filter with a tape measure before ordering. The actual width and length of the replacement opening should be within 1/8 of an inch of the ordered size. Replacement is recommended every 30 to 90 days depending on environmental conditions and usage load.

Key Features

• Custom exact-size construction: hand-fabricated to the specific dimensions ordered, using cut-down or combined filter frames with tape reinforcement as needed
• MERV 8 filtration captures 70 to 85 percent of particles between 3 and 10 microns, including pollen, dust, pet dander, lint, and mold spores
• Activated carbon layer reduces common household odors alongside standard particulate filtration
• Reinforced 2-part filter frame provides added structural durability while supporting consistent airflow
• Pack of 6 filters for extended supply on a single order
• Made in the USA

Compatibility

Designed as a custom exact-size replacement filter for residential forced-air furnaces and central air conditioning systems with a filter slot requiring a nominal 6x30x1 opening. Verify actual slot dimensions with a tape measure before ordering, as custom sizes are non-returnable.

Installation Notes

Filter replacement is typically performed by an HVAC technician or a qualified homeowner. Before replacing the filter, set the thermostat to off and shut down the air handler or furnace at the unit disconnect or breaker to prevent unfiltered air bypass during the swap. Confirm airflow direction is marked on the filter frame and matches the direction of airflow in the system. Because this is a custom-made product, measure the existing filter slot carefully before ordering - custom filters are not eligible for return.