Nordic Pure 6x20x1CustomM14+C-6 Merv 14 Plus Carbon Filter

Product Description

The NORDIC PURE 6x20x1CustomM14+C-6 is a custom-cut, pleated MERV 14 plus carbon air filter designed for residential and light-commercial HVAC systems. Sold in a 6-pack, each filter measures 5.5 x 19.5 x 0.75 inches actual size and combines a high-efficiency filtration media with an activated carbon layer to address both particulates and odors. At MERV 14, this filter captures over 90% of airborne particles between 1 and 10 microns, and between 75% and 95% of particles in the 0.3 to 1 micron range. Licensed HVAC technicians and knowledgeable homeowners install these filters in forced-air furnace and air conditioning systems where standard nominal sizes do not fit the return-air opening.

This filter is built to order based on the exact nominal dimension of 6 x 20 x 1 inches, with an actual size of 5.5 x 19.5 x 0.75 inches. It is suited for residential gas furnaces, heat pumps, and split-system air conditioners using a 1-inch filter rack. The carbon layer makes it a practical choice in environments with elevated odor loads such as pet households, cooking areas, or light smoke exposure. Because the filter is custom-made to the listed dimensions, installers should confirm the actual opening size with a tape measure before ordering. Nordic Pure manufactures these filters in the USA using a reinforced 2-part frame construction, which may incorporate tape bonding depending on the specific dimensions cut.

Key Features

• MERV 14 media captures over 90% of particles between 1 and 10 microns, including dust, pollen, mold spores, pet dander, bacteria, smoke, and smog
• Activated carbon layer reduces common household odors alongside particulate filtration
• Reinforced 2-part frame construction supports balanced airflow and consistent filter geometry over the service life
• Custom-cut to nominal 6 x 20 x 1 inches; actual size is 5.5 x 19.5 x 0.75 inches
• Sold as a 6-pack; recommended replacement interval is every 30 to 90 days depending on environment
• Made in the USA

Compatibility

Designed as a custom OEM-style replacement for residential and light-commercial forced-air furnace and air conditioning systems using a 1-inch filter rack with a nominal 6 x 20 x 1 inch opening. Confirm actual filter slot dimensions with a tape measure before ordering, as custom sizes are non-returnable.

Installation Notes

Installation is performed by a licensed HVAC technician or qualified homeowner. Power down the air handler or furnace at the disconnect or breaker before removing the old filter. Verify airflow direction arrow on the new filter frame aligns with the direction of airflow toward the blower. Because this is a custom-cut product, measure the actual filter slot opening to the nearest 1/8 inch before ordering to ensure correct fit.