Nordic Pure 6x16x1CustomM13-6 Merv 13 Furnace Filter 6 Pack

Product Description

The NORDIC PURE 6x16x1CustomM13-6 is a custom-made MERV 13 pleated air filter designed for residential and light commercial HVAC systems, including forced-air furnaces and central air conditioning units. Sold in a 6-pack, each filter measures 5.75 x 15.75 x 0.75 inches actual size (nominal 6x16x1). The electrostatically charged filter media captures over 90% of airborne particles between 1 and 10 microns and 50% to 70% of particles between 0.3 and 1 micron, including dust, pollen, pet dander, mold spores, smoke, bacteria, and virus carriers. HVAC technicians and service professionals install these as direct replacements in systems requiring a 6x16x1 nominal filter slot.

This filter is suited for residential homes and commercial office environments where improved indoor air quality is a priority. It is especially appropriate for occupants with allergies, asthma, or pet exposure. The MERV 13 efficiency rating is equivalent to MPR 2200-2400 on competing scales and follows the ASHRAE industry standard for filter performance measurement. Nordic Pure recommends replacing the filter every 1 to 3 months, with more frequent changes in high-dust environments or homes with pets. The custom sizing means this filter is hand-cut to the exact 6x16x1 nominal dimensions and is not interchangeable with standard off-the-shelf sizes without verification of actual measurements.

Key Features

• MERV 13 rated per ASHRAE standard - captures particles as small as 0.3 microns including bacteria and virus carriers
• Electrostatically charged pleated media attracts and holds fine airborne particles without promoting mold or bacterial growth on the filter surface
• Reinforced 2-part beverage board frame with moisture-resistant construction for structural integrity across the filter service life
• Custom-cut to exact nominal dimensions - hand-made to the 6x16x1 size listed; actual size is 5.75 x 15.75 x 0.75 inches
• Maintains low airflow resistance to help the HVAC system operate efficiently and reduce strain on the blower motor
• Made in the USA

Compatibility

Designed as a custom OEM-style replacement for residential and commercial HVAC systems requiring a nominal 6x16x1 filter. Actual filter dimensions are 5.75 x 15.75 x 0.75 inches. Verify the actual slot measurement before ordering, as custom-cut filters are non-returnable.

Installation Notes

Installation is performed by HVAC technicians or qualified service personnel. Always shut down the HVAC system at the thermostat and disconnect power at the air handler or furnace before replacing the filter. Confirm airflow direction arrows on the filter frame are aligned with the direction of airflow toward the blower. Because this is a custom-cut size, measure the existing filter slot to the nearest fraction of an inch before ordering to ensure proper fit - gaps around the filter frame allow unfiltered air to bypass the media.