Nordic Pure 29x35x1CustomM10+C-6 Merv 10 Carbon Filter

Product Description

The NORDIC PURE 29x35x1CustomM10+C-6 is a custom-made, pleated MERV 10 Plus Carbon air filter designed for residential and light-commercial forced-air HVAC systems. This filter combines mechanical filtration with an activated carbon layer to capture airborne particulates and reduce common household odors in a single filter pass. The nominal size is 29x35x1, with actual dimensions of 28.5 inches by 34.5 inches by 0.75 inches. Each order contains 6 filters. Because this is a custom-cut product built to exact dimensions, it is hand-fabricated per order and is not eligible for return. HVAC technicians and service professionals should confirm the actual opening dimensions before ordering.

This filter fits residential and light-commercial gas furnaces and central air conditioning systems that require a non-standard filter opening not served by a stock size. The 1-inch nominal depth suits standard 1-inch filter track installations. The MERV 10 rating provides high-efficiency particle capture while maintaining acceptable static pressure for most residential air handlers and furnaces. At MERV 10, the filter captures over 85 percent of airborne particles between 3 and 10 microns, including dust, lint, pollen, pet dander, mold spores, and odor-causing compounds. Nordic Pure recommends replacing 1-inch filters every 30 to 90 days depending on environmental conditions.

Key Features

• MERV 10 rating captures over 85 percent of particles between 3 and 10 microns, including pollen, pet dander, dust, lint, and mold spores
• Activated carbon layer reduces common airborne odors alongside particulate filtration
• Reinforced 2-part frame construction provides added structural durability and supports consistent airflow over the filter service life
• Custom-fabricated to actual dimensions of 28.5 inches by 34.5 inches by 0.75 inches - not a stock cut-to-fit pad
• 6 filters per box, supporting multiple replacement cycles from a single order
• Made in the USA

Compatibility

Designed for forced-air HVAC systems requiring a custom 29x35x1 nominal filter size where standard stock dimensions do not fit the filter track. Confirm the actual filter slot opening measures approximately 28.5 inches by 34.5 inches before ordering, as custom sizes are non-returnable.

Installation Notes

Installation is performed by HVAC technicians or qualified service personnel. Power down or switch the system to off at the thermostat before replacing the filter to prevent unfiltered air from being drawn through the system during the swap. Verify airflow direction arrow on the filter frame aligns with the direction of airflow toward the blower. Because this is a custom-cut filter, measure the existing filter slot to the nearest 1/8 inch before ordering - do not rely solely on any label found on the old filter.