Nordic Pure 25x32x1ExactCustomM7+C-6 Merv 7 Carbon Filter 6pk

Product Description

The NORDIC PURE 25x32x1ExactCustomM7+C-6 is a custom-cut, pleated MERV 7 plus carbon air filter designed for residential and light commercial HVAC systems. Measuring 25 x 32 x 0.75 inches actual size, this filter uses electrostatically charged synthetic media combined with a carbon layer to capture airborne particulates and reduce odors simultaneously. Sold in a 6-pack, it is intended for use in standard forced-air furnaces and central air conditioning systems. HVAC technicians and experienced DIYers install this filter as a direct drop-in replacement where a 25x32x1 nominal slot is present.

This filter is suited for residential homes and office environments where both particulate capture and odor control are priorities. The MERV 7 rating captures 50 to 70 percent of airborne particles between 3 and 10 microns, including lint, household dust, pollen, pet dander, mold spores, and baking flour. The added carbon layer addresses common household odors. Custom construction means the filter is cut or combined from standard frames and may incorporate tape at the seams to achieve the exact nominal dimension ordered. Recommended replacement interval is every 30 to 90 days depending on environment and system load.

Key Features

• MERV 7 rating captures 50 to 70 percent of particles in the 3 to 10 micron range, including dust, pollen, and pet dander
• Integrated carbon layer reduces common household odors alongside particulate filtration
• Electrostatically charged synthetic media attracts and holds airborne contaminants without significantly restricting airflow
• Reinforced 2-part frame construction provides added rigidity for consistent fit and performance over the filter life
• Exact custom sizing at 25 x 32 x 0.75 inches actual; nominal 25x32x1 slot fitment
• Made in the USA; sold as a 6-pack

Compatibility

Custom-made to fit HVAC systems with a nominal 25x32x1 filter slot. Actual dimensions are 25 x 32 x 0.75 inches. Measure your existing filter before ordering, as this is a non-returnable custom-made product. Verify the existing slot accepts an actual filter width and length within 0.125 inches of the stated actual size.

Installation Notes

Filter installation is typically performed by a licensed HVAC technician or a knowledgeable building owner. Always shut down the furnace or air handler at the disconnect or thermostat before removing or installing the filter. Note the airflow direction arrow printed on the filter frame and orient it toward the blower. Due to the custom construction, handle the filter carefully at the seams to avoid frame distortion during installation.