Nordic Pure 22x30x1CustomM14-6 Merv 14 Furnace Filter 6pk

Product Description

The NORDIC PURE 22x30x1CustomM14-6 is a custom-cut, MERV 14 rated pleated air filter designed for residential and commercial HVAC systems, including forced-air furnaces and central air conditioning units. Measuring 21.5 x 29.5 x 0.75 inches actual size with a nominal size of 22x30x1, this filter ships as a six-pack. The electrostatically charged filter media captures over 90% of airborne particles between 1 and 10 microns and 75% to 95% of particles between 0.3 and 1 microns. The heavy-duty, moisture-resistant beverage board frame supports structural integrity under high airflow demand. HVAC techs and facilities maintenance professionals install these filters in systems rated to handle MERV 14 and above.

This filter is suited for residential homes, commercial offices, and high-efficiency HVAC systems designed to accommodate MERV 14 filtration. Target environments include spaces where occupants have allergies, asthma, or sensitivity to fine particulates such as smoke, bacteria, pet dander, mold spores, and virus carriers. Because of the higher filtration efficiency and corresponding airflow restriction, the HVAC system must be rated for MERV 14 or higher. Replacement every one to three months is recommended under normal conditions, with more frequent changes in high-dust or pet-occupied environments. Custom sizes are hand-fabricated to the exact nominal dimensions entered at order and are not eligible for return.

Key Features

• MERV 14 efficiency captures over 90% of particles from 1 to 10 microns and 75% to 95% of particles from 0.3 to 1 microns
• Electrostatically charged filter media attracts and holds fine airborne particles without promoting bacterial or mold growth on the media surface
• Heavy-duty, moisture-resistant beverage board frame provides structural support and resists deformation in humid duct conditions
• Reinforced two-part frame construction delivers balanced filtration and consistent airflow performance over the filter service life
• Custom-fabricated to exact nominal dimensions - actual size is 21.5 x 29.5 x 0.75 inches
• Made in the USA

Compatibility

Designed as a custom OEM-style replacement air filter for residential and commercial forced-air furnaces and central AC systems rated to handle MERV 14 filtration or higher, including newer high-efficiency systems configured for HEPA-grade media.

Installation Notes

HVAC technicians and qualified maintenance personnel should power down the furnace or air handler at the system disconnect before replacing the filter. Before ordering, measure the existing filter to confirm the exact width (short side) and height (long side) in inches, as custom sizes are manufactured to the dimensions specified at order. Install the filter with the airflow arrow on the frame pointing toward the blower and away from the return air duct. Verify that the installed system is rated for MERV 14 or above before use, as high-efficiency media increases static pressure and may reduce airflow in systems not designed for it.