Nordic Pure 22x30x1CustomM10-6 Merv 10 Furnace Filter 6 Pack

Product Description

The NORDIC PURE 22x30x1CustomM10-6 is a custom-cut, MERV 10 pleated air filter designed for residential and light commercial HVAC systems including furnaces and central air conditioners. Rated MERV 10, this filter captures over 85% of airborne particles in the 3 to 10 micron range, including lint, dust, pollen, pet dander, and mold spores. The filter media is electrostatically charged to attract and hold particles, and it will not promote the growth of bacteria or mold on the filter surface. Licensed HVAC technicians and experienced service professionals install this filter as a direct replacement in forced-air systems requiring a 22x30x1 nominal size.

This filter is suited for residential homes and commercial office environments where improved indoor air quality is a priority. It balances high-efficiency particle capture with low airflow resistance, helping HVAC equipment run efficiently and reducing strain on blower motors. The reinforced two-part beverage board frame offers added structural durability compared to standard single-frame designs. This custom size is hand-fabricated to the nominal dimensions of 22x30x1 inches, with an actual size of 21.5 x 29.5 x 0.75 inches. Nordic Pure recommends replacing this filter every one to three months under normal conditions, and more frequently in homes with pets or occupants with allergies.

Key Features

• MERV 10 rated - captures over 85% of particles between 3 and 10 microns, including pollen, pet dander, dust, lint, and mold spores
• Electrostatically charged filter media attracts airborne particles more effectively than standard fiberglass filters
• Moisture-resistant beverage board frame with reinforced two-part construction for added durability and consistent airflow support
• Filter media will not promote the growth of bacteria or mold on the filter surface
• Custom-fabricated to exact nominal dimensions; actual size is 21.5 x 29.5 x 0.75 inches
• Made in the USA

Compatibility

Designed as a custom OEM-style replacement for residential and light commercial forced-air furnace and central air conditioning systems requiring a 22x30x1 nominal filter size. Verify the actual filter cavity dimensions of 21.5 x 29.5 x 0.75 inches against your equipment before ordering. Custom sizes are non-returnable.

Installation Notes

Filter installation is typically performed by a licensed HVAC technician or qualified service professional. Always shut down the furnace or air handler at the thermostat and disconnect power at the disconnect switch or breaker before removing or inserting a filter. Confirm airflow direction by matching the arrow printed on the filter frame to the direction of airflow toward the blower. Because this is a custom-fabricated size, measure the existing filter cavity carefully before ordering, as custom filters are not eligible for return.