Nordic Pure 22x29x1CustomM14-6 Merv 14 Furnace Filter 6pk

Product Description

The NORDIC PURE 22x29x1CustomM14-6 is a custom-cut MERV 14 pleated air filter designed for residential and light commercial HVAC systems. Sold in a 6-pack, each filter measures 21.75 x 28.75 x 0.75 inches actual size with a nominal size of 22x29x1. The electrostatically charged filter media captures over 90% of airborne particles between 1 and 10 microns, and between 75% and 95% of particles in the 0.3 to 1 micron range. The heavy-duty, moisture-resistant beverage board frame supports consistent airflow and structural integrity throughout the filter service life. Licensed HVAC technicians and qualified installers fit this filter in forced-air furnace and air conditioning systems.

This filter is suited for residential and commercial forced-air HVAC applications where high-efficiency filtration is required. Captured contaminants include lint, dust, pollen, pet dander, mold spores, smoke particles, bacteria, virus carriers, and smog. MERV 14 is comparable to MPR 2800-rated filters. Because of the higher filtration density and associated airflow restriction, the HVAC system must be rated to handle MERV 14 or higher. This rating is commonly found in newer high-efficiency systems designed for HEPA-level performance. Nordic Pure recommends replacing this filter every 1 to 3 months, with more frequent changes in homes with pets or occupants with allergies.

Key Features

• MERV 14 efficiency captures over 90% of particles in the 1-10 micron range and 75%-95% in the 0.3-1 micron range
• Electrostatically charged media attracts and holds fine airborne particles without promoting bacterial or mold growth on the filter surface
• Heavy-duty moisture-resistant beverage board frame with reinforced 2-part construction for added durability
• Custom-cut to nominal 22x29x1 inches; actual dimensions are 21.75 x 28.75 x 0.75 inches
• Rated equivalent to MPR 2800; meets ASHRAE MERV rating standards
• Made in the USA

Compatibility

Designed as an OEM-style replacement pleated filter for residential and commercial forced-air furnace and air conditioning systems rated to accept MERV 14 or higher filtration. Verify that your HVAC equipment is rated for MERV 14 before installation. This is a custom-made size; confirm actual filter slot dimensions before ordering.

Installation Notes

Installation is performed by a licensed HVAC technician or qualified service professional. Power down the HVAC system at the thermostat and disconnect power at the breaker before removing the old filter. Confirm airflow direction arrows on the filter frame align with system airflow before seating the filter. Because this is a custom-cut product, measure the actual opening in your unit and compare to the listed actual size of 21.75 x 28.75 x 0.75 inches before ordering, as custom sizes cannot be returned.