Nordic Pure 20x36x1CustomM7-6 Merv 7 Furnace Filter 6 Pack

Product Description

The NORDIC PURE 20x36x1CustomM7-6 is a custom-cut, MERV 7 pleated air filter supplied in a 6-pack, designed for residential and light commercial HVAC systems including central air conditioners and gas or electric furnaces. Each filter carries a nominal size of 20x36x1 inches and an actual size of 19.5 x 35.5 x 0.75 inches. The electrostatically charged filter media captures lint, dust, pollen, pet dander, mold spores, and dust mites, removing 50 to 70 percent of airborne particles in the 3 to 10 micron range. Installed by HVAC technicians or knowledgeable homeowners, this filter is manufactured to the exact dimensions specified at the time of order and is built on a reinforced two-part beverage board frame for structural integrity during service.

This filter is suited for residential homes, apartments, and light commercial spaces where moderate particulate control is required without excessive restriction to airflow. The MERV 7 rating is comparable to MPR 600 filters and follows the ASHRAE filtration efficiency standard. The electrostatically charged pleated media outperforms standard fiberglass filters for particle capture and is treated to resist promoting bacterial or mold growth on the filter surface. Because this is a custom-fabricated size, it is hand-cut or assembled from standard frames and may incorporate tape joining depending on the final dimensions. Filters should be replaced every 1 to 3 months, or more frequently in environments with pets or allergy concerns.

Key Features

• MERV 7 rated media captures 50 to 70 percent of particles in the 3 to 10 micron range, including pollen, lint, dust, and pet dander
• Electrostatically charged pleated media attracts airborne particles and outperforms fiberglass in filtration efficiency
• Reinforced two-part beverage board frame provides moisture resistance and structural support throughout the filter life
• Media treated to resist promoting mold or bacterial growth on the filter surface
• Custom-fabricated to the nominal size of 20x36x1 inches with an actual size of 19.5 x 35.5 x 0.75 inches
• Made in the USA

Compatibility

Designed as a custom OEM-style replacement filter for residential and light commercial HVAC systems requiring a nominal 20x36x1 inch filter slot. Verify the actual opening dimensions against the actual size of 19.5 x 35.5 x 0.75 inches before ordering. Custom sizes are non-returnable; measure the existing filter before placing an order.

Installation Notes

Installation is performed by HVAC technicians or qualified service personnel. Always shut down the furnace or air handler at the disconnect or thermostat before removing the existing filter. Confirm airflow direction arrow on the filter frame aligns with the direction of airflow toward the blower. Because this is a custom size, confirm fit against the actual dimensions prior to installation to avoid gaps that would allow unfiltered air bypass.