Nordic Pure 20x30x1M11MiniPleat-2 Merv 11 Mini Pleat Filter

Product Description

The NORDIC PURE 20x30x1M11MiniPleat-2 is a MERV 11 Tru Mini Pleat air filter sold in a 2-pack with a nominal size of 20x30x1 and an actual size of 19.75 x 29.75 x 0.75 inches. The mini-pleat design incorporates 2.5 times more pleats than standard filter media, increasing surface area for improved particle capture while maintaining adequate airflow through the system. The filter media is self-supporting synthetic polyester fiber housed in a 2-part, moisture-resistant beverage board frame. HVAC technicians, building maintenance staff, and knowledgeable DIYers install these filters in residential and light commercial forced-air systems.

This filter targets residential and commercial HVAC applications where mid-range air quality improvement is required. It captures lint, household dust, pollen, pet dander, dust mites, mold spores, smoke particles, virus carriers, and allergens. The MERV 11 rating is equivalent to MPR 1000-1200, making it well suited for environments with pets, allergy sensitivities, or renovation activity where airborne particle loads are elevated. Nordic Pure recommends replacement every 2 to 3 months depending on operating conditions and environment.

Key Features

• MERV 11 filtration rating, equivalent to MPR 1000-1200, for mid-to-high particle capture efficiency
• 2.5 times more pleats than standard filters, increasing media surface area without restricting airflow
• Actual size 19.75 x 29.75 x 0.75 inches for accurate fit - always verify against your existing filter before ordering
• Self-supporting synthetic polyester fiber media attracts and retains airborne particles
• 2-part moisture-resistant beverage board frame for structural durability in humid environments
• Manufactured in the USA

Compatibility

Designed as a direct-fit replacement for residential and light commercial forced-air furnace and air handler systems accepting a nominal 20x30x1 filter. Actual dimensions are 19.75 x 29.75 x 0.75 inches - always measure the existing filter slot before installation to confirm fit, as nominal and actual sizes differ across HVAC equipment manufacturers.

Installation Notes

Power down or set the thermostat to the off position before removing the existing filter to prevent unfiltered air from circulating through the air handler. Note the airflow direction arrow printed on the filter frame and orient the replacement filter so the arrow points toward the blower. Disposable filters of this type do not require tools for installation. Follow the equipment manufacturer's recommended maintenance schedule and replace this filter every 2 to 3 months under normal operating conditions, or more frequently in high-dust or high-occupancy environments.