Nordic Pure 19x35_5/8x1CustomM13+C-6 Merv 13 Filter 6pk

Product Description

The NORDIC PURE 19x35_5/8x1CustomM13+C-6 is a custom-cut, MERV 13 plus carbon pleated air filter sold in a pack of six. It is designed for residential and light-commercial HVAC systems - specifically forced-air furnaces and central air conditioning units - where a non-standard filter size is required. The filter carries a MERV 13 rating, capturing over 90% of airborne particles between 1 and 10 microns and 50% to 70% of particles between 0.3 and 1 microns. An activated carbon layer addresses odors and gaseous contaminants. The nominal size is 19 x 35-5/8 x 1 inches, with an actual size of 19 x 35.5 x 0.75 inches. Each filter is hand-fabricated to these exact dimensions in the USA.

This filter is suited for residential forced-air systems requiring a custom dimension that falls outside standard manufactured sizes. It is appropriate for installations where a 1-inch-depth filter slot is specified and where occupants are concerned about allergens, pet dander, smoke, mold spores, bacteria, viruses, and household odors. The reinforced two-part frame supports consistent airflow and structural integrity over the filter's service life. For 1-inch filters, Nordic Pure recommends a replacement interval of 30 to 90 days depending on environmental conditions and system run time.

Key Features

• MERV 13 rating captures over 90% of particles from 1 to 10 microns, including pollen, dust, pet dander, mold spores, smoke, bacteria, and viruses
• Activated carbon layer reduces odors and gaseous airborne contaminants
• Custom-fabricated to the exact nominal size 19 x 35-5/8 x 1 inches (actual: 19 x 35.5 x 0.75 inches)
• Reinforced two-part frame construction for structural durability and balanced airflow
• Pack of 6 filters provides extended supply for a single filter slot
• Made in the USA

Compatibility

Designed as a custom-size OEM-style replacement for residential and light-commercial forced-air furnace and central air conditioning systems requiring a 19 x 35-5/8 x 1 inch filter slot. Verify actual opening dimensions with a tape measure before ordering; custom sizes are not eligible for return.

Installation Notes

This filter is installed by HVAC technicians or qualified homeowners performing routine filter maintenance. Power down or set the thermostat to off before removing the existing filter to prevent unfiltered air from circulating through the system. Confirm airflow direction arrows on the filter frame align with system airflow before seating the filter. Because this is a custom-cut product, verify the actual opening dimensions of the filter slot to the nearest 1/8 inch before ordering.