Nordic Pure 17x27x1ExactCustomM7+C-6 Merv 7 Plus Carbon Filter

Product Description

The NORDIC PURE 17x27x1ExactCustomM7+C-6 is a custom-cut, pleated carbon air filter designed for residential AC and furnace systems. Built to exact dimensions of 17 x 27 x 0.75 inches (nominal 17x27x1), this filter combines MERV 7 mechanical filtration with an activated carbon layer to capture airborne particulates and reduce common household odors. Each pack contains 6 filters. A licensed HVAC technician or experienced DIYer handles installation. The reinforced 2-part frame provides structural stability during airflow cycling, and the pleated media supports low airflow resistance while maintaining filtration efficiency across the service interval.

This filter is sized for HVAC systems where standard nominal dimensions do not match the actual filter opening. It fits residential gas furnaces, air handlers, and central AC systems that require a 17 x 27 x 1 nominal slot with an actual opening of 17 x 27 x 0.75 inches. Because this is a custom-made product cut to the exact dimensions listed, it is essential to measure the existing filter with a tape measure before ordering. The actual width and length of the installed filter should be within 1/8 inch of the dimensions specified. Custom sizing may involve frame tape construction depending on final dimensions.

Key Features

• MERV 7 filtration captures 50-70% of airborne particles between 3-10 microns, including lint, dust, pollen, pet dander, mold spores, and odors
• Activated carbon layer reduces common household odors alongside mechanical particulate filtration
• Reinforced 2-part frame construction provides double-durability and supports consistent airflow performance
• Custom exact-fit sizing: actual dimensions are 17 x 27 x 0.75 inches to fit nominal 17x27x1 openings
• 6 filters per pack; recommended replacement every 30-90 days depending on environment
• Made in the USA

Compatibility

Designed as a custom exact-fit replacement for residential AC and furnace systems with a nominal 17x27x1 filter slot and an actual opening of 17 x 27 x 0.75 inches. Measure the existing filter before ordering to confirm fitment. Custom sizes are not eligible for returns.

Installation Notes

Power down the furnace or air handler at the disconnect or thermostat before servicing the filter. Confirm airflow direction arrow on the filter frame aligns with system airflow toward the blower. Because this is a custom-made filter, verify actual slot dimensions with a tape measure prior to ordering. Replace every 30-90 days for 1-inch filters; environmental conditions such as pets, dust, or high occupancy may shorten the service interval.