Nordic Pure 17x25x1CustomM13-6 Merv 13 Furnace Filter 6 Pack

Product Description

The NORDIC PURE 17x25x1CustomM13-6 is a custom-made, MERV 13 rated pleated air filter designed for residential and light-commercial HVAC systems including forced-air furnaces and central air conditioners. Rated at MERV 13, this filter captures over 90% of airborne particles between 1 and 10 microns, and between 50% and 70% of particles in the 0.3 to 1 micron range. That includes lint, dust, pollen, pet dander, mold spores, smoke, bacteria, and virus carriers. The filter ships in a six-pack, with a nominal size of 17x25x1 inches and an actual size of 16.5 x 24.5 x 0.75 inches. Licensed HVAC technicians and knowledgeable homeowners install this filter in standard one-inch filter tracks.

This filter is suited for residential homes and commercial office environments where indoor air quality is a priority. It is a strong fit for households with pets, allergy sufferers, or occupants sensitive to airborne particulates. The MERV 13 rating is comparable to filters rated MPR 2200-2400 on manufacturer-specific scales. Because this is a custom-made size, it is produced to the exact nominal dimensions ordered and is not eligible for return. Nordic Pure recommends replacement every one to three months, with more frequent changes in high-traffic or pet-occupied spaces. Measure the existing filter carefully before ordering to confirm the 16.5 x 24.5 x 0.75 inch actual size is correct for your unit.

Key Features

• MERV 13 efficiency captures over 90% of particles between 1 and 10 microns, and 50% to 70% of particles between 0.3 and 1 microns
• Electrostatically charged filter media attracts and holds airborne particles without promoting bacterial or mold growth on the media surface
• Reinforced two-part beverage board frame rated for moisture resistance and built for structural durability
• Low airflow resistance design supports HVAC system efficiency and helps extend filter service life
• Custom-cut to the exact nominal dimensions specified at ordering - actual size 16.5 x 24.5 x 0.75 inches
• Made in the USA

Compatibility

Designed as a custom OEM-style replacement for residential and light-commercial forced-air furnace and central AC filter tracks accepting a nominal 17x25x1 inch filter. Confirm the actual opening in your unit accepts a 16.5 x 24.5 x 0.75 inch filter before ordering.

Installation Notes

Power down the HVAC system at the thermostat and, where applicable, at the disconnect before removing the old filter. Install with the airflow arrow on the filter frame pointing toward the blower and away from the return air duct. MERV 13 media carries moderate static pressure drop - verify the air handler is rated for filters in this efficiency range before installation to avoid restricted airflow. Custom sizes are non-returnable, so confirm dimensions with a tape measure prior to ordering.