Nordic Pure 17x22x1CustomM10-12 Merv 10 Furnace Filter 12pk

Product Description

The NORDIC PURE 17x22x1CustomM10-12 is a custom-cut, pleated MERV 10 air filter designed for residential and light commercial HVAC systems, including forced-air furnaces and central air conditioning units. Rated MERV 10 per ASHRAE standards, it captures over 85% of airborne particles in the 3-10 micron range, including lint, dust, pollen, pet dander, and mold spores. The electrostatic media attracts and holds fine particles without promoting bacterial or mold growth on the filter material. The nominal size is 17x22x1 inches with an actual size of 16.5 x 21.5 x 0.75 inches. Sold in a 12-pack, this filter suits high-use environments where regular replacements are needed.

This filter is intended for residential and commercial forced-air HVAC systems requiring a 17x22x1 nominal-size filter. It is well-suited for households with pets, allergy sufferers, or anyone requiring consistent particulate control. The MERV 10 efficiency rating is comparable to MPR 900-1000 filters used by other manufacturers. Because this is a custom-made product, it is hand-fabricated to the exact nominal dimensions ordered. Construction may involve cutting down or combining standard filter frames, and tape may be used in assembly depending on the exact size. Filters should be replaced every 1 to 3 months depending on system usage, occupancy, and indoor air quality conditions.

Key Features

• MERV 10 rated per ASHRAE standards, capturing over 85% of particles between 3 and 10 microns
• Actual size 16.5 x 21.5 x 0.75 inches to fit standard nominal 17x22x1 filter openings
• Electrostatically charged pleated media attracts airborne particles and resists bacterial and mold growth on the filter surface
• Heavy-duty, moisture-resistant beverage board frame construction with a reinforced 2-part frame design for added durability
• Maintains low airflow resistance to support HVAC system efficiency and help extend filter service life
• Made in the USA; sold in a 12-pack for extended service intervals

Compatibility

Designed as a custom OEM-style replacement for residential and light commercial forced-air furnace and central AC systems requiring a nominal 17x22x1 inch filter. Verify the actual filter slot dimensions against the stated actual size of 16.5 x 21.5 x 0.75 inches before ordering. Custom-made filters are not returnable.

Installation Notes

Air filter replacement is a standard HVAC maintenance task typically performed by HVAC technicians or qualified DIYers. Always power down the HVAC system at the thermostat or disconnect before removing the old filter. Confirm airflow direction by matching the arrow printed on the filter frame to the direction of airflow toward the blower. Because this is a custom-fabricated size, measure the existing filter slot carefully before ordering, as returns are not accepted on custom dimensions.