Nordic Pure 17x19x1ExactCustomM14-6 Merv 14 Filter 6 Pack

Product Description

The NORDIC PURE 17x19x1ExactCustomM14-6 is a custom-made, pleated AC furnace air filter rated MERV 14, sold in a 6-pack. The actual size is 17 x 19 x 0.75 inches. This filter is designed for residential and light commercial HVAC systems requiring high-efficiency particulate capture. Electrostatically charged filter media attracts and holds airborne particles, while the heavy-duty, moisture-resistant beverage board frame provides structural integrity. MERV 14 filters capture over 90 percent of particles between 1 and 10 microns and 75 to 95 percent of particles between 0.3 and 1 micron. Licensed HVAC technicians and knowledgeable homeowners typically install this filter during routine preventive maintenance.

This filter suits residential and commercial HVAC systems rated to handle MERV 14 or higher, including newer high-efficiency systems designed for HEPA-level filtration. It targets lint, dust, pollen, pet dander, mold spores, smoke, bacteria, virus carriers, and smog. Because MERV 14 increases airflow restriction compared to lower-rated filters, the installed HVAC unit must be rated to accommodate this filtration level. Replacement every 1 to 3 months is recommended, with more frequent changes in homes with pets or occupants sensitive to allergens.

Key Features

• MERV 14 rated - captures over 90 percent of particles 1 to 10 microns and 75 to 95 percent of particles 0.3 to 1 micron
• Actual size 17 x 19 x 0.75 inches - custom-cut to exact dimensions for a precise fit
• Electrostatically charged media attracts fine airborne particles and will not promote bacterial or mold growth on the filter surface
• Heavy-duty, moisture-resistant beverage board frame with reinforced 2-part construction for consistent airflow support
• Made in the USA
• Sold as a 6-pack

Compatibility

Designed as a custom-size OEM-style replacement for residential and light commercial AC and forced-air furnace systems rated to accept MERV 14 filtration. Verify that your HVAC equipment is rated for MERV 14 or higher before installing. Measure the existing filter opening to confirm the 17 x 19 x 0.75-inch actual size is correct prior to ordering, as this is a non-returnable custom product.

Installation Notes

HVAC filters at MERV 14 are typically installed by licensed HVAC technicians or qualified service professionals. Always power down the air handler or furnace at the disconnect before removing or installing the filter. Confirm airflow direction arrows on the filter frame align with the direction of airflow in the unit. Because this is a custom-made product cut to exact dimensions, measure the filter slot precisely before ordering - custom sizes are not eligible for return.