Nordic Pure 17_3/8x35x1CustomM8+C-6 Merv 8 Carbon Filter

Product Description

The NORDIC PURE 17_3/8x35x1CustomM8+C-6 is a custom-cut, pleated MERV 8 Plus Carbon air filter sold in a 6-pack. It is designed for residential and light-commercial HVAC systems, including gas furnaces and central air conditioning units. The filter combines a MERV 8 mechanical filtration media with an activated carbon layer to capture airborne particulates and reduce common household odors. The actual size is 17.25 x 35 x 0.75 inches, cut to fit non-standard filter openings. HVAC technicians and installers specify this filter when a standard nominal size does not match the existing filter slot. Each filter is hand-fabricated to the stated dimensions in the USA.

This filter is suited for residential HVAC systems where the filter slot does not accept a standard nominal size. Typical installations include central forced-air furnaces and air handlers with custom-dimensioned return-air grilles or filter racks. The MERV 8 rating makes it appropriate for households with moderate dust, pollen, pet dander, and odor concerns. Because this is a custom-made product built to the exact nominal dimensions listed, technicians should confirm the actual filter slot size before ordering. Nordic Pure recommends replacing 1-inch filters every 30 to 90 days depending on site conditions.

Key Features

• MERV 8 media captures 70 to 85 percent of airborne particles between 3 and 10 microns, including lint, dust, pollen, pet dander, and mold spores
• Activated carbon layer reduces common household odors without significantly increasing airflow restriction
• Custom-fabricated to the nominal size 17-3/8 x 35 x 1 inches with an actual size of 17.25 x 35 x 0.75 inches
• Reinforced 2-part frame construction increases structural durability and supports consistent airflow over the filter life
• Sold as a 6-pack, reducing service call frequency for planned maintenance
• Manufactured in the USA

Compatibility

Designed as a custom OEM-style replacement for residential and light-commercial forced-air furnace and air handler systems requiring a nominal filter size of 17-3/8 x 35 x 1 inches. Verify the actual slot dimensions before ordering, as this product is non-returnable once manufactured.

Installation Notes

Installation is performed by licensed HVAC technicians or qualified service personnel. Power down the air handler or furnace at the disconnect before removing or inserting the filter. Confirm airflow direction arrow on the filter frame aligns with the direction of airflow toward the blower. Because this is a 1-inch filter, inspect and replace on a 30-to-90-day cycle depending on occupancy, pets, and local air quality conditions.