Nordic Pure 16x36x1ExactCustomM13+C-6 Merv 13 Filter 6pk

Product Description

The NORDIC PURE 16x36x1ExactCustomM13+C-6 is a custom-cut, pleated MERV 13 plus carbon air filter designed for residential and light-commercial HVAC systems. Measuring 16 x 36 x 3/4 inches actual size, this filter uses electrostatically charged synthetic media combined with an activated carbon layer to capture fine airborne particulates and adsorb odors simultaneously. MERV 13 filtration captures over 90% of particles between 1 and 10 microns and 50% to 70% of particles between 0.3 and 1 microns. Licensed HVAC technicians and building maintenance professionals install these as drop-in replacements where standard sizes do not fit the existing filter slot. Each box contains 6 filters.

This filter is suited for residential forced-air furnaces and split-system air handlers where a non-standard slot width or length requires a custom-fabricated filter. The exact nominal size of 16 x 36 x 1 inches corresponds to an actual dimension of 16 x 36 x 0.75 inches. Custom construction may involve cutting down or combining standard filter frames and may include tape reinforcement at seams. The reinforced 2-part frame supports balanced filtration and consistent airflow across the full service life of the filter. Recommended replacement interval is every 30 to 90 days depending on environmental conditions.

Key Features

• MERV 13 plus activated carbon media captures particulates and reduces odors including smoke and smog
• Captures over 90% of airborne particles between 1 and 10 microns, including pollen, mold spores, pet dander, bacteria, and virus carriers
• Electrostatically charged synthetic media attracts and holds fine dust, lint, and allergens
• Custom exact-cut dimensions - actual size 16 x 36 x 0.75 inches - for non-standard filter openings
• Reinforced 2-part frame provides structural support and maintains airflow geometry under system static pressure
• Made in the USA; pack of 6 filters

Compatibility

Custom-fabricated to the exact nominal dimensions of 16 x 36 x 1 inches. Intended for any forced-air furnace or air handler with a filter slot that requires this specific non-standard size. Measure the existing filter opening before ordering - custom sizes are not eligible for returns.

Installation Notes

Installation is performed by a licensed HVAC technician or qualified maintenance professional. Power down the air handler or furnace at the disconnect before removing the existing filter. Confirm airflow direction arrow on the filter frame aligns with the direction of airflow toward the blower before seating the filter. Because this is a custom size, verify actual slot dimensions with a tape measure prior to ordering, as returns are not accepted on custom-cut filters.