Nordic Pure 16x26x1ExactCustomM7-6 Merv 7 Filter 6 Pack

Product Description

The NORDIC PURE 16x26x1ExactCustomM7-6 is a custom-cut, MERV 7 pleated air filter designed for residential and light commercial AC and furnace systems. Rated at MERV 7 per ASHRAE standards, this filter captures lint, dust, pollen, pet dander, mold spores, and similar airborne particles in the 3-10 micron range at 50-70% efficiency. The filter media is electrostatically charged to attract unwanted particles and will not promote bacterial or mold growth on the media surface. The frame is constructed from heavy-duty, moisture-resistant beverage board. This filter is custom-made to the exact nominal size of 16x26x1 with an actual size of 16 x 26 x 0.75 inches and is sold in a pack of 6. Licensed HVAC technicians and knowledgeable DIYers install this filter type in forced-air systems.

This filter is suited for residential homes and light commercial environments using standard forced-air HVAC systems. It is intended for installations where a 16x26x1 nominal size filter is required and an exact-fit custom dimension is necessary. Custom-cut construction means the filter is assembled by cutting down or combining standard frames, and tape may be used depending on the final size. This makes it appropriate for units where standard off-the-shelf sizes do not fit correctly. Replacement interval is typically every 1-3 months, with more frequent changes recommended in homes with pets or occupants with allergies.

Key Features

• MERV 7 rated per ASHRAE standards, comparable to MPR 600 efficiency ratings
• Captures 50-70% of airborne particles between 3 and 10 microns, including dust, pollen, pet dander, and mold spores
• Electrostatically charged filter media attracts airborne particles without promoting bacterial or mold growth
• Heavy-duty, moisture-resistant beverage board frame with reinforced 2-part construction for durability
• Custom exact-size construction to fit units where nominal sizes do not apply
• Made in the USA

Compatibility

Designed as a custom exact-size replacement filter for residential and light commercial forced-air AC and furnace systems requiring a 16x26x1 nominal size with an actual dimension of 16 x 26 x 0.75 inches. Measure the existing filter carefully before ordering, as this is a custom-made product and actual size may differ from nominal size printed on a current filter.

Installation Notes

Installation is performed by a licensed HVAC technician or qualified DIYer. Power down the HVAC system at the thermostat and disconnect power at the disconnect or breaker before removing or installing the filter. Confirm airflow direction arrow on the filter frame aligns with the direction of airflow in the system before seating the filter. Because this filter is custom-made to exact dimensions, verify measurements with a tape measure prior to ordering, as custom sizes are not eligible for return.