Nordic Pure 16x25x4PCP-2 Carbon Pleated Filter Merv 8 2 Pack

Product Description

The NORDIC PURE 16x25x4PCP-2 is a Pure Carbon Pleated MERV 8 air filter sold in a 2-pack, designed for residential and light commercial HVAC systems where odor control and particulate filtration are both priorities. The filter media combines a non-woven polyester base infused with naturally derived charcoal to capture airborne particles and neutralize odors simultaneously. With a MERV 8 efficiency rating and a pleated design that delivers three times the carbon surface area of a flat-panel equivalent, this filter balances effective filtration with low restriction to airflow. Licensed HVAC technicians and knowledgeable homeowners alike install this filter in standard forced-air systems.

This filter is suited for residential applications including apartments, single-family homes, and home offices, as well as light commercial and industrial settings where a pre-filter ahead of a high-efficiency unit is needed to manage strong odors. Common odor sources it addresses include pets, smoke, cooking, garbage, and bathroom exhaust migration, as well as Volatile Organic Compounds (VOCs) from household cleaning products. Nordic Pure recommends replacing the filter every 3 to 6 months for sustained odor control and filtration efficiency. Note the actual size is 15.5 x 24.5 x 3.63 inches, not the nominal 16 x 25 x 4 - measure your existing filter before ordering to confirm fit. If replacing a 4 3/8-inch-depth filter in a Honeywell unit, this is not the correct replacement.

Key Features

• MERV 8 rated - captures pollen, pet dander, dust mites, and similar particles
• Charcoal-infused polyester media neutralizes pet odors, smoke, cooking smells, and VOCs
• Pleated construction provides three times the carbon media area versus flat-panel carbon filters
• Heavy-duty moisture-resistant beverage board frame with bonded metal mesh pleat support
• Suitable as a stand-alone residential filter or pre-filter in commercial HVAC systems
• Made in the USA

Compatibility

Designed as an OEM-style replacement for residential and light commercial forced-air furnace and air handler systems accepting a nominal 16x25x4 filter. Actual installed size is 15.5 x 24.5 x 3.63 inches - verify slot depth before installation.

Installation Notes

Installation is performed by a licensed HVAC technician or qualified homeowner. Always shut down the furnace or air handler at the thermostat and disconnect power at the disconnect or breaker before opening the filter cabinet. Confirm actual filter slot dimensions against the actual size of 15.5 x 24.5 x 3.63 inches before installing. Follow the airflow direction arrow printed on the filter frame, and replace every 3 to 6 months or more frequently during heavy-use periods or home renovation activity.