Nordic Pure 16x24x4M14+C-6 Merv 14 Plus Carbon Filter 6 Pack

Product Description

The NORDIC PURE 16x24x4M14+C-6 is a MERV 14 pleated air filter with activated carbon, sold in a six-pack. It is designed for forced-air HVAC systems in residential and light commercial applications. The filter media is electrostatically charged synthetic material that captures airborne particulates down to 0.30 microns. A flat panel infused with activated charcoal runs alongside the pleated media to adsorb odorous gases and volatile organic compounds (VOCs). The heavy-duty beverage board frame is moisture resistant, and a metal mesh support grid bonded to the pleats maintains structural integrity under airflow. HVAC technicians, facilities maintenance staff, and knowledgeable homeowners install this filter in standard 16x24x4 filter housings.

This filter is suited for residential and light commercial forced-air systems where both high particulate capture and odor control are required. It captures lint, household dust, pollen, dust mite debris, pet dander, smoke particles, smog, virus carriers, bacteria, and mold spores each time air passes through. The MERV 14 rating makes it appropriate for newer, high-efficiency HVAC systems engineered to handle filters rated MERV 14 and above. Systems sized for HEPA-grade filtration are well matched to this filter. Filter replacement every 3 to 6 months is recommended to maintain airflow and filtration efficiency, though actual service life varies based on indoor and outdoor air quality conditions.

Key Features

• MERV 14 filtration captures more than 90% of 1.0-10.0 micron contaminants and up to 85% of 0.30-1.0 micron contaminants
• Activated carbon flat panel adsorbs odorous gases and VOCs while maintaining airflow
• Electrostatically charged, hypoallergenic, antimicrobial synthetic filter media
• Moisture-resistant beverage board frame with bonded metal mesh pleat support grid
• Equivalent to MPR 2800 rating for cross-reference with other filter rating systems
• Made in the USA; sold as a six-pack

Compatibility

Designed for forced-air HVAC systems that accept a 16x24x4 nominal filter size. Actual filter dimensions are 15.38 x 23.38 x 3.63 inches. Verify that your system is rated to accommodate MERV 14 or higher before installation, as high-MERV filters increase static pressure drop across the air handler.

Installation Notes

Installation is performed by licensed HVAC technicians or qualified maintenance personnel. Set the system thermostat to off and allow the blower to stop before replacing the filter. Confirm the actual slot dimensions of the filter housing against the actual filter size of 15.38 x 23.38 x 3.63 inches rather than relying on the nominal size label. Install with the airflow direction arrow on the frame pointing toward the blower. Dispose of the used filter according to local waste guidelines.