Nordic Pure 16x22_1/4x1ExactCustomM7+C-6 Merv 7 Carbon Filter

Product Description

The NORDIC PURE 16x22_1/4x1ExactCustomM7+C-6 is a custom-cut, pleated carbon air filter rated MERV 7, sold in a 6-pack. It is designed for residential and light-commercial HVAC systems where the filter opening does not match a standard nominal size. The actual dimensions are 16 x 22.25 x 0.75 inches, cut to exact measurements so the filter seats flush without gaps. The carbon layer targets odors in addition to particulate, and the MERV 7 rating captures 50 to 70 percent of airborne particles between 3 and 10 microns, including lint, dust, pollen, pet dander, and mold spores. Licensed HVAC technicians and experienced DIYers install this filter in forced-air furnace and air-conditioning systems where airflow resistance must stay low.

This filter is suited for residential forced-air systems and light-commercial applications where the return-air grille or filter rack requires a non-standard opening size. Because it is manufactured to the exact dimensions entered at ordering, it is intended for installations where standard nominal filters leave gaps along the edges. The 6-pack format supports a full maintenance cycle for systems on a 30-to-90-day replacement schedule. Nordic Pure builds this filter by cutting down or combining standard filter frames, and tape may be used in construction depending on the final dimensions. Made in the USA.

Key Features

• MERV 7 rating captures 50 to 70 percent of particles between 3 and 10 microns, including dust, pollen, pet dander, lint, mold spores, and odors via the carbon layer
• Custom-cut to exact nominal size 16 x 22-1/4 x 1, with actual dimensions of 16 x 22.25 x 0.75 inches for a flush, gap-free fit
• Reinforced 2-part filter frame provides added structural durability and maintains consistent airflow over the filter life
• Carbon media layer reduces common household odors alongside particulate filtration
• Pleated construction supports low airflow resistance, reducing strain on the HVAC blower
• Made in the USA; sold in a 6-pack to support scheduled maintenance intervals

Compatibility

Custom-made to the exact dimensions listed above for forced-air furnace and air-conditioning systems requiring a non-standard filter size. Intended for any residential or light-commercial HVAC system with a filter opening that accepts a 16 x 22-1/4 x 1 nominal filter where standard sizes do not fit properly.

Installation Notes

Installation is performed by a licensed HVAC technician or a qualified service professional. Before replacing the filter, set the thermostat to off and confirm the blower has stopped. Measure the existing filter opening to the nearest 1/8 inch before ordering, as custom sizes are not eligible for return. Insert the filter with the airflow arrow on the frame pointing toward the blower, and confirm the filter seats flush on all four edges with no bypass gaps.