Nordic Pure 15x9x1CustomM10+C-6 Merv 10 Plus Carbon Filter

Product Description

The NORDIC PURE 15x9x1CustomM10+C-6 is a custom-cut, pleated MERV 10 Plus Carbon air filter designed for residential and light-commercial HVAC systems, including forced-air furnaces and central air conditioning units. Rated MERV 10, it captures over 85% of airborne particles in the 3-10 micron range, including dust, pollen, pet dander, mold spores, lint, and odors. The activated carbon layer targets common household odors that standard pleated filters leave behind. Each pack includes 6 filters. The actual size of this filter is 15 x 8.75 x 0.75 inches, which is standard practice for filter manufacturing where nominal dimensions are slightly larger than the true cut size. HVAC technicians and installers should verify actual slot dimensions before ordering any custom size.

This filter is suited for residential forced-air systems where the filter slot does not match a standard nominal size. It is built to the exact dimensions listed above using Nordic Pure custom fabrication, which may involve cutting down or combining standard filter frames and may include frame tape depending on final dimensions. Custom sizing makes this filter appropriate for older homes, non-standard air handler configurations, or retrofit installations where off-the-shelf sizes do not fit. This product ships as a 6-pack, making it practical for scheduled preventive maintenance intervals. For 1-inch filters, Nordic Pure recommends replacement every 30 to 90 days depending on indoor air quality conditions.

Key Features

• MERV 10 rating captures over 85% of particles between 3 and 10 microns, including dust, pollen, pet dander, mold spores, and lint
• Activated carbon layer reduces common household odors not addressed by standard pleated media
• Custom-cut to actual dimensions of 15 x 8.75 x 0.75 inches for non-standard filter slots
• Reinforced 2-part frame construction designed for balanced filtration and consistent airflow
• 6 filters per pack, supporting a full preventive maintenance cycle
• Made in the USA

Compatibility

Designed for forced-air furnaces and central air conditioning systems with a filter slot requiring a nominal 15x9x1 custom size. Verify the actual opening measures within 1/8 inch of 15 x 8.75 x 0.75 inches before ordering. Custom-fabricated filters are non-returnable; measure the existing filter or the filter slot carefully prior to purchase.

Installation Notes

Installation is performed by HVAC technicians or qualified service personnel. Always shut down the furnace or air handler at the thermostat and the disconnect switch before removing or installing a filter. Confirm airflow direction marked on the filter frame matches the direction of airflow in the system before securing the filter in the slot. For 1-inch filters in higher-dust or pet-dander environments, inspect the filter monthly and replace on a 30 to 90 day schedule to prevent airflow restriction and system strain.