Nordic Pure 15x36x1CustomM10+C-6 Merv 10 Carbon Filter

Product Description

The NORDIC PURE 15x36x1CustomM10+C-6 is a custom-made, pleated MERV 10 Plus Carbon air filter designed for residential and light-commercial HVAC systems, including forced-air furnaces and central air conditioning units. Each filter is hand-cut to exact dimensions, with an actual size of 14.75 x 35.75 x 0.75 inches to fit openings nominally listed as 15 x 36 x 1 inches. The activated carbon media layer targets odors alongside standard particulate capture. This SKU ships as a 6-pack, making it a practical bulk replacement for technicians servicing a single system or stocking a seasonal supply. Installation requires no tools beyond the filter itself and is performed by HVAC technicians or knowledgeable homeowners during routine maintenance.

This filter is suited for residential forced-air systems where the return-air grille or filter cabinet accepts a non-standard nominal 15 x 36 x 1 inch slot. Because it is custom-made to the exact dimensions entered at order, it is intended for installations where no standard off-the-shelf size provides a proper fit within 1/8 inch of the actual opening. Nordic Pure constructs these filters by cutting down or combining 1-inch filter frames; tape joining may be used depending on the final dimensions. The MERV 10 rating makes this filter appropriate for households dealing with dust, pollen, pet dander, lint, and mold spores, while the carbon layer addresses common household odors. Replacement interval is every 30 to 90 days for 1-inch filters depending on environmental conditions.

Key Features

• MERV 10 filtration captures over 85% of airborne particles between 3 and 10 microns, including dust, pollen, pet dander, lint, and mold spores
• Activated carbon media layer reduces common household odors in addition to particulate filtration
• Custom-made to exact nominal dimensions of 15 x 36 x 1 inches with an actual size of 14.75 x 35.75 x 0.75 inches
• Reinforced 2-part frame construction provides structural stability and supports consistent airflow throughout the filter life
• Ships as a 6-pack for convenient bulk replacement stocking
• Made in the USA

Compatibility

Designed as a custom OEM-style replacement for residential and light-commercial forced-air furnace and air conditioning systems requiring a non-standard nominal 15 x 36 x 1 inch filter. Verify the actual opening measures within 1/8 inch of 14.75 x 35.75 x 0.75 inches before ordering, as this is a non-returnable custom-made product.

Installation Notes

HVAC technicians and qualified service personnel should power down the furnace or air handler at the disconnect or thermostat before replacing the filter. Confirm airflow direction arrow on the filter frame aligns with the direction of airflow toward the blower. Because this is a 1-inch filter, replacement every 30 to 90 days is recommended depending on dust load and system runtime. Custom-made filters are non-returnable, so verify actual filter slot dimensions with a tape measure prior to ordering.