Nordic Pure 15x20x1M14+C-6 Merv 14 Carbon Air Filter 6pk

Product Description

The NORDIC PURE 15x20x1M14+C-6 is a MERV 14 pleated air filter with an integrated activated carbon layer, sold in a 6-pack. The filter combines electrostatically charged synthetic media with a flat activated carbon panel to capture fine airborne particulates and adsorb odorous gases and volatile organic compounds (VOCs). The nominal size is 15x20x1 inches with an actual size of 14.5 x 19.5 x 0.75 inches. A heavy-duty, moisture-resistant beverage board frame and a metal mesh support grid bonded to the pleats provide structural integrity through each service interval. The antimicrobial filter media resists bacterial and mold growth on the media surface. This filter is rated MERV 14, equivalent to an MPR rating of 2800, and is designed for HVAC systems rated to handle MERV 14 filtration and above.

This filter is suited for residential and light commercial HVAC applications where both high-efficiency particulate capture and odor control are required. Target contaminants include airborne dust, pollen, mold spores, pet dander, dust mite debris, smoke particles, bacteria, and smog. The added activated carbon layer addresses household odors and VOCs that standard pleated filters do not adsorb. It is particularly well-matched to newer high-efficiency forced-air systems designed to accommodate MERV 13 and above media. Six filters are included per box, supporting a maintenance cycle of roughly 30 to 90 days per filter depending on household conditions and air quality.

Key Features

• MERV 14 rated filtration equivalent to MPR 2800 for superior particulate capture
• Activated carbon layer adsorbs odors and VOCs alongside standard particulate filtration
• Electrostatically charged, hypoallergenic, and antimicrobial synthetic filter media
• Heavy-duty moisture-resistant beverage board frame with bonded metal mesh pleat support
• Actual size 14.5 x 19.5 x 0.75 inches fits nominal 15x20x1 filter slots
• Made in the USA; 6 filters per box

Compatibility

Designed as a direct replacement for nominal 15x20x1 inch residential and light commercial forced-air furnace and air handler filter slots in HVAC systems rated to accept MERV 14 or higher filter media. Verify that your system is rated for MERV 14 before installation, as high-efficiency media increases static pressure drop.

Installation Notes

Filter replacement is performed by qualified HVAC technicians or knowledgeable end users. Power down the air handler or furnace at the disconnect before removing the old filter. Confirm airflow direction arrows on the filter frame align with system airflow before inserting. Because MERV 14 media restricts airflow more than lower-rated filters, confirm the equipment manufacturer specifies compatibility with MERV 14 or equivalent media to avoid coil freeze-up or heat exchanger stress. Replace every 30 to 90 days depending on usage and indoor air quality conditions.