Nordic Pure 14x27x1ExactCustomM13+C-6 Merv 13 Carbon Filter

Product Description

The NORDIC PURE 14x27x1ExactCustomM13+C-6 is a custom-cut, pleated AC and furnace air filter rated MERV 13 with activated carbon media. It measures 14 x 27 x 0.75 inches actual size and ships in a six-pack. The electrostatically charged synthetic filter media captures over 90% of airborne particles between 1 and 10 microns, and 50% to 70% of particles between 0.3 and 1 microns. The added carbon layer addresses odors that standard MERV 13 filters do not target. Licensed HVAC technicians and knowledgeable DIYers install this filter in forced-air residential and light-commercial systems where a non-standard slot dimension requires a custom fit.

This filter is sized for air handlers, furnaces, and central AC systems with a filter slot that accepts a 14 x 27 x 0.75-inch actual-dimension media. Because it is custom-made to exact specifications, it is intended for installations where standard nominal sizes do not fit properly. The MERV 13 plus carbon rating suits environments with elevated particulate load, pet dander, smoke, or odor concerns. The reinforced two-part frame construction maintains structural integrity across the rated service interval. Nordic Pure recommends replacing the filter every 30 to 90 days depending on environmental conditions.

Key Features

• MERV 13 rating captures lint, dust, pollen, pet dander, mold spores, smoke, bacteria, and virus-carrying particles
• Activated carbon layer reduces common household odors that MERV 13 media alone does not address
• Actual size 14 x 27 x 0.75 inches - custom-cut to exact dimensions for non-standard filter slots
• Electrostatically charged synthetic media provides low airflow resistance relative to filtration efficiency
• Reinforced two-part frame construction for durability and consistent media support over the filter life
• Made in the USA; ships as a six-pack

Compatibility

Designed for forced-air furnaces and central AC air handlers requiring a custom filter slot with an actual opening of 14 x 27 x 0.75 inches. Verify the actual open dimension of the filter slot before ordering; this is a custom-made product and is not eligible for return.

Installation Notes

Power down or set the thermostat to off before removing the existing filter to prevent unfiltered air from bypassing the media during the swap. Confirm airflow direction arrow on the filter frame aligns with the direction of airflow toward the blower. Because this is a custom exact-size filter, measure the actual slot opening with a tape measure before ordering - the nominal listed size and the actual size differ. Follow local mechanical codes and the equipment manufacturer guidelines for filter replacement intervals.