Nordic Pure 14x22x1CustomM10+C-6 Merv 10 Plus Carbon Filter

Product Description

The NORDIC PURE 14x22x1CustomM10+C-6 is a custom-made, pleated MERV 10 Plus Carbon air filter designed for residential and light-commercial AC and furnace systems. Rated MERV 10, it captures over 85% of airborne particles between 3 and 10 microns, including lint, dust, pollen, pet dander, mold spores, and odors. The activated carbon layer targets gaseous contaminants and household odors that standard pleated filters miss. Built on a reinforced 2-part frame, this filter delivers balanced filtration while supporting efficient airflow. Each pack contains 6 filters. The actual dimensions are 13.75 x 21.75 x 0.75 inches, slightly smaller than the nominal 14 x 22 x 1 listing, which is standard for filter sizing.

This filter is suited for residential forced-air furnaces and central air conditioning systems where a non-standard opening requires a custom-cut filter. It is a good fit for homeowners and HVAC technicians maintaining systems with odd-dimension filter slots that standard stock sizes do not cover. At 1 inch nominal thickness, it fits single-slot filter racks commonly found in return-air grilles and side-entry air handlers. Nordic Pure manufactures this filter to the exact nominal dimensions ordered, using cut-down or combined filter frames as needed. Tape may be used in construction depending on the size. Replacement is recommended every 30 to 90 days under normal operating conditions.

Key Features

• MERV 10 filtration captures over 85% of particles from 3 to 10 microns, including pollen, pet dander, mold spores, and lint
• Activated carbon layer reduces common household odors and gaseous contaminants
• Reinforced 2-part frame provides added structural durability and consistent airflow support
• Custom-made to the exact nominal dimensions listed - measure existing filter before ordering
• Pack of 6 filters supports multiple replacement cycles
• Made in the USA

Compatibility

Designed as a custom OEM-style replacement filter for residential and light-commercial forced-air furnace and central AC systems requiring a nominal 14 x 22 x 1 inch filter slot. Because this is a custom-manufactured size, verify the actual opening dimensions before ordering. The actual filter size is 13.75 x 21.75 x 0.75 inches.

Installation Notes

HVAC technicians and knowledgeable homeowners typically install 1-inch panel filters without special tools. Power down the air handler or furnace at the disconnect or thermostat before removing the old filter. Confirm airflow direction and match the directional arrow on the filter frame to the direction of airflow toward the blower. Because this is a custom-made size, it is not eligible for return - measure the actual filter slot to the nearest 1/8 inch before placing an order.