Nordic Pure 12x27x1CustomM13+C-6 Merv 13 Carbon Filter 6pk

Product Description

The NORDIC PURE 12x27x1CustomM13+C-6 is a custom-cut, MERV 13 plus carbon pleated air filter designed for residential and light commercial HVAC systems. Built from electrostatically charged synthetic media combined with a carbon layer, it captures over 90% of airborne particles between 1 and 10 microns and 50% to 70% of particles between 0.3 and 1 micron. The carbon layer addresses odors and gaseous contaminants that standard particulate filters cannot handle. This filter ships as a 6-pack sized to a nominal 12 x 27 x 1 inch footprint, with an actual size of 11.5 x 26.5 x 0.75 inches. Licensed HVAC technicians and knowledgeable homeowners install this filter in forced-air furnaces and air handlers.

This filter is suited for residential forced-air heating and cooling systems where standard sizes do not fit the filter rack. The custom construction uses a reinforced 2-part frame, which may incorporate tape depending on final dimensions. It targets common indoor air quality concerns including lint, household dust, pollen, dust mites, pet dander, mold spores, smoke, bacteria, and viruses. The added carbon layer helps reduce odors from cooking, pets, and other household sources. Nordic Pure recommends replacing the filter every 30 to 90 days depending on environmental conditions and system load.

Key Features

• MERV 13 filtration captures over 90% of particles between 1 and 10 microns, including pollen, mold spores, pet dander, smoke, bacteria, and virus carriers
• Carbon layer reduces odors and gaseous contaminants not addressed by mechanical filtration alone
• Electrostatically charged synthetic media enhances particle capture without significantly restricting airflow
• Reinforced 2-part frame provides added structural durability compared to single-frame construction
• Custom-cut to a nominal 12 x 27 x 1 inch size with an actual size of 11.5 x 26.5 x 0.75 inches
• Made in the USA; sold as a 6-pack

Compatibility

Custom-made to fit filter racks with a nominal 12 x 27 x 1 inch opening. Verify the actual opening dimensions before ordering. Measure the existing filter or the filter rack slot directly; the actual filter size of 11.5 x 26.5 x 0.75 inches should fall within 0.125 inch of the opening. Custom sizes are non-returnable.

Installation Notes

Power down the HVAC system at the thermostat or disconnect before replacing the filter. Note the airflow direction arrow printed on the filter frame and align it toward the air handler or blower, not toward the return duct. Custom-cut frames may have taped seams; handle with care to avoid deforming the media. Replace every 30 to 90 days based on system runtime, occupancy, and local air quality conditions.