Nordic Pure 12x25x1M14+C-6 Merv 14 Plus Carbon Filter 6 Pack

Product Description

The NORDIC PURE 12x25x1M14+C-6 is a MERV 14 pleated air filter with an integrated activated carbon layer, sold in a 6-pack. The electrostatically charged synthetic filter media captures fine airborne particulates while the activated carbon component adsorbs odorous gases and volatile organic compounds (VOCs). The nominal size is 12x25x1 inches with an actual size of 11.75 x 24.75 x 0.75 inches. A metal mesh support grid is bonded to the pleats for structural integrity, and the frame is constructed from moisture-resistant beverage board. This filter is installed by HVAC technicians or knowledgeable service personnel in residential and commercial forced-air systems rated to handle MERV 14 or higher static pressure loads.

This filter is suited for high-efficiency residential and light-commercial HVAC systems where both fine particulate control and odor reduction are required. The MERV 14 rating makes it appropriate for systems already operating with high-efficiency filtration, including those designed to accept HEPA-grade media. The activated carbon layer addresses smoke particles, VOCs, and other gaseous contaminants that standard pleated filters do not capture. Because MERV 14 filters carry higher air-flow resistance than lower-rated media, the air handler or furnace must be rated to accommodate that static pressure before installation. Filter replacement every 30 to 90 days is typical depending on indoor air quality conditions and system runtime.

Key Features

• MERV 14 filtration rating captures dust, pollen, mold spores, pet dander, smoke, bacteria, smog, and dust mite debris
• Activated carbon flat-panel layer adsorbs VOCs and eliminates unwanted odors
• Electrostatically charged, hypoallergenic, and antimicrobial synthetic filter media inhibits bacterial and mold growth
• Metal mesh support grid bonded to pleats provides added structural support under airflow load
• Moisture-resistant beverage board frame resists deformation in humid conditions
• Made in the USA; equivalent to MPR 2800 rated filters

Compatibility

Designed as a replacement filter for residential and light-commercial forced-air HVAC systems with a 12x25x1 inch nominal filter slot rated to handle MERV 14 or higher static pressure. Actual installed dimensions are 11.75 x 24.75 x 0.75 inches; verify measured opening size before ordering.

Installation Notes

Installation is performed by a licensed HVAC technician or qualified service personnel. Power down the air handler or furnace at the disconnect or breaker before removing the existing filter. Confirm the system blower and ductwork are rated for the higher static pressure associated with MERV 14 media before installing this filter. Follow the airflow direction arrow printed on the filter frame and replace the filter every 30 to 90 days to maintain system efficiency.