Nordic Pure 12x25x1M14+C-12 Merv 14 Plus Carbon Filter 12pk

Product Description

The NORDIC PURE 12x25x1M14+C-12 is a MERV 14 pleated air filter with an integrated activated carbon layer, sold in a 12-pack. The filter media is electrostatically charged synthetic material that captures fine airborne particulates down to the MERV 14 threshold, while the activated carbon panel adsorbs odorous gases and volatile organic compounds (VOCs). The nominal size is 12x25x1 inches with an actual size of 11.75 x 24.75 x 0.75 inches. A metal mesh support grid is bonded to the pleats for structural integrity. The moisture-resistant beverage board frame and antimicrobial media inhibit mold and bacterial growth within the filter itself. Licensed HVAC technicians and knowledgeable HVAC installers handle this replacement filter.

This filter is suited for residential and light-commercial forced-air HVAC systems rated to handle MERV 14 filtration or higher. Because of the elevated filtration efficiency and associated static pressure drop, the system must be capable of operating with high-MERV media before this filter is installed. It performs well in newer high-efficiency systems that previously used HEPA-style filtration. The carbon layer makes it particularly appropriate for environments with indoor odor concerns such as cooking fumes, smoke, or pet odors. Each 12-pack provides a full-year supply at the recommended 30-to-90-day replacement interval.

Key Features

• MERV 14 electrostatically charged synthetic media captures dust, pollen, mold spores, pet dander, smoke particles, dust mite debris, and bacteria
• Activated carbon flat-panel layer adsorbs VOCs and eliminates unwanted odors while maintaining airflow
• Antimicrobial, hypoallergenic filter media inhibits bacterial and mold growth within the filter
• Heavy-duty moisture-resistant beverage board frame with bonded metal mesh pleat support grid
• MERV 14 rating is equivalent to MPR 2800
• Made in the USA

Compatibility

Designed as a replacement pleated air filter for forced-air HVAC systems with filter slots accepting a nominal 12x25x1-inch filter. Verify the actual opening dimensions against the actual filter size of 11.75 x 24.75 x 0.75 inches before installation. Systems must be rated to handle MERV 14 filtration or higher.

Installation Notes

HVAC technicians and qualified installers should power down the air handler or furnace at the disconnect or thermostat before replacing the filter. Confirm airflow direction by matching the arrow on the filter frame to the direction of airflow toward the blower. Because MERV 14 media creates higher static pressure than lower-rated filters, verify that the system blower is rated for high-MERV operation before installation. Filters should be replaced every 30 to 90 days depending on indoor air quality conditions and system runtime.