Nordic Pure 12x24x4M13+C-6 Merv 13 Carbon Air Filter 6pk

Product Description

The NORDIC PURE 12x24x4M13+C-6 is a MERV 13 pleated air filter with activated carbon, sold in a 6-pack. The filter media is electrostatically charged synthetic material rated to capture more than 90% of 1.0-10.0 micron particulates and up to 75% of 0.30-1.0 micron particulates. An integrated flat-panel activated carbon layer adsorbs odorous gases, vapors, and volatile organic compounds (VOC) while maintaining low pressure drop across the system. The heavy-duty beverage board frame is moisture resistant, and a bonded metal mesh support grid holds pleat geometry under airflow. Licensed HVAC technicians and mechanical contractors install this filter in forced-air heating and cooling systems serving residential and light commercial applications.

This filter fits standard 4-inch filter housings in residential and light commercial forced-air systems. It is suited for environments where both fine particulate control and odor reduction are required, such as homes with pets, smokers, or occupants with allergies or respiratory sensitivities. The nominal size is 12x24x4 inches with an actual size of 11.5 x 23.38 x 3.63 inches. Nordic Pure recommends replacing this filter every 3-6 months depending on indoor and outdoor air quality conditions, with more frequent changes recommended during construction, renovations, or periods of high outdoor pollution.

Key Features

• MERV 13 rating captures lint, dust, pollen, dust mites, pet dander, smoke, smog, virus carriers, bacteria, and mold spores
• Activated carbon flat panel adsorbs odors and VOC alongside particulate filtration
• Electrostatically charged, hypoallergenic, and antimicrobial synthetic filter media
• Heavy-duty moisture-resistant beverage board frame with bonded metal mesh pleat support
• Equivalent to MPR 2200-2400 rated filters
• Made in the USA

Compatibility

Designed as a direct-fit replacement for standard 4-inch pleated filter housings that accept a nominal 12x24x4 inch filter. Actual dimensions are 11.5 x 23.38 x 3.63 inches; confirm the actual slot dimensions before ordering, as nominal and actual filter sizes frequently differ across equipment brands.

Installation Notes

Installation is performed by a licensed HVAC technician or qualified service professional. Set the thermostat to the off position and shut down the air handler or furnace at the unit disconnect before replacing the filter. Confirm airflow direction arrow on the filter frame aligns with the direction of airflow toward the blower. Inspect the filter housing for bypasses or gaps that could allow unfiltered air to enter the system.