Nordic Pure 12x22x1ExactCustomM10+C-6 Merv 10 Filter

Product Description

The NORDIC PURE 12x22x1ExactCustomM10+C-6 is a custom-cut, pleated AC and furnace air filter rated MERV 10 with an integrated carbon layer. It measures 12 x 22 x 0.75 inches actual size and ships as a 6-pack. The electrostatically charged synthetic filter media captures over 85% of airborne particles between 3 and 10 microns, including lint, household dust, pollen, pet dander, mold spores, and odors. The carbon layer assists with odor reduction. This filter is manufactured to exact dimensions and is intended as a custom-size replacement for residential and light commercial HVAC systems where standard nominal sizes do not fit the filter slot.

This filter is suited for residential forced-air furnaces, central air conditioning systems, and air handlers where a non-standard 12 x 22 x 1 nominal slot is present. Because it is custom-made to exact dimensions, it is appropriate for installations where standard off-the-shelf sizes leave gaps that reduce filtration efficiency. HVAC technicians, property managers, and knowledgeable DIYers typically install this filter during routine maintenance cycles. Nordic Pure recommends changing the filter every 30 to 90 days depending on indoor and outdoor air quality conditions, occupancy, and the presence of pets or allergen sources.

Key Features

• MERV 10 rating captures over 85% of particles between 3 and 10 microns, including pollen, dust mite debris, pet dander, and mold spores
• Integrated carbon layer targets common household odors
• Electrostatically charged synthetic media enhances particle capture without significantly restricting airflow
• Reinforced 2-part frame construction provides added structural durability for the custom form factor
• Custom exact-cut to 12 x 22 x 0.75 inches actual size to minimize bypass gaps in non-standard filter slots
• Made in the USA

Compatibility

Custom-made to fit HVAC systems with a nominal 12 x 22 x 1 filter slot and an actual opening that accepts a filter measuring 12 x 22 x 0.75 inches. Verify the actual dimensions of your existing filter with a tape measure before ordering, as this item is non-returnable.

Installation Notes

Power down the furnace or air handler at the thermostat and disconnect power at the breaker before replacing the filter. Confirm airflow direction by checking the arrow printed on the filter frame and align it toward the blower. Because this is a custom-cut filter, verify the actual slot dimensions prior to installation to ensure a snug fit with minimal bypass. Filter replacement is a standard maintenance task performed by HVAC technicians and qualified DIYers; no special tools are required.