Nordic Pure 12x15x1CustomM8-12 Merv 8 Furnace Filter 12 Pack

Product Description

The NORDIC PURE 12x15x1CustomM8-12 is a custom-made MERV 8 pleated air filter designed for residential and light commercial HVAC systems, including forced-air furnaces and central air conditioners. Rated at MERV 8 per ASHRAE standards, this filter captures 70 to 85 percent of airborne particles between 3 and 10 microns, including lint, dust, pollen, pet dander, and mold spores. The electrostatically charged filter media attracts and holds unwanted particles without promoting bacterial or mold growth on the media itself. The frame is constructed from moisture-resistant beverage board. This filter is cut to custom dimensions by hand and is sold in a 12-pack. Licensed HVAC technicians and experienced DIYers install this filter in standard 1-inch filter slots.

This filter is suited for residential homes, apartments, and small commercial spaces using ducted forced-air HVAC systems. The nominal size is 12x15x1 with an actual size of 11.5 x 14.5 x 0.75 inches. The MERV 8 efficiency rating is comparable to MPR 800 on competing scales. Filters should be replaced every 1 to 3 months under normal conditions. Households with pets or allergy sufferers may require more frequent changes. This listing ships 12 filters per order and is a custom-made product built to the dimensions listed.

Key Features

• MERV 8 rated per ASHRAE standard, capturing 70 to 85 percent of particles in the 3 to 10 micron range
• Electrostatically charged pleated media improves particle capture compared to standard fiberglass filters
• Moisture-resistant beverage board frame with reinforced 2-part construction for durability
• Filter media does not promote bacterial or mold growth on the filter surface
• Custom-cut to exact nominal dimensions of 12x15x1 (actual: 11.5 x 14.5 x 0.75 inches)
• Made in the USA

Compatibility

Designed as a custom OEM-style replacement for residential and light commercial forced-air furnace and central AC systems that accept a 1-inch nominal filter in a 12x15x1 nominal slot. Verify actual filter slot dimensions before ordering, as this is a non-returnable custom-made product.

Installation Notes

This filter is installed by HVAC technicians or qualified service personnel. Always shut down the HVAC system at the thermostat and disconnect power at the breaker before removing or inserting any air filter. Confirm the actual filter slot dimensions with a tape measure before ordering, as nominal and actual sizes differ. Install with the airflow arrow on the frame pointing toward the blower or furnace, not toward the return air duct.