Nordic Pure 12_1/8x15x1CustomM8+C-6 Merv 8 Plus Carbon Filter

Product Description

The NORDIC PURE 12_1/8x15x1CustomM8+C-6 is a custom-made, pleated MERV 8 Plus Carbon air filter designed for residential and light-commercial HVAC systems including gas furnaces, air handlers, and central air conditioning units. Sold in a 6-pack, each filter carries a nominal size of 12-1/8 x 15 x 1 inches with an actual size of 12 x 15 x 0.75 inches. The activated carbon layer targets odors alongside standard particulate filtration, making this filter a practical choice for households with pets or cooking odors. HVAC technicians and service professionals order this SKU when a non-standard opening requires a cut-to-dimension filter rather than a shelf-stock size.

This filter is suited for residential forced-air systems where the filter rack or return-air grille opening does not match any standard nominal dimension. Nordic Pure builds custom sizes by cutting down or combining standard filter frames, with tape reinforcement applied where needed to achieve the specified dimension. The reinforced 2-part frame supports consistent airflow and structural integrity across the filter face. Replacement interval for 1-inch filters is typically every 30 to 90 days depending on household conditions such as pet traffic, renovation dust, and local air quality. Confirm the actual opening measurement with a tape measure before ordering, as custom-sized filters are non-returnable.

Key Features

• MERV 8 rating captures 70 to 85 percent of airborne particles between 3 and 10 microns, including dust, pollen, lint, pet dander, and mold spores
• Activated carbon layer reduces common household odors without requiring a separate odor-control filter
• Custom-cut to the exact nominal dimension listed so the filter fits non-standard return openings
• Reinforced 2-part frame provides added rigidity and supports balanced airflow over the full service life
• Pack of 6 filters supports a multi-month maintenance supply for a single system
• Made in the USA

Compatibility

Designed as a custom OEM-style replacement for any residential or light-commercial forced-air furnace or air handler with a filter opening requiring a nominal 12-1/8 x 15 x 1 inch filter. Measure the actual filter slot before ordering; custom sizes are not eligible for return.

Installation Notes

Filter installation and replacement is typically performed by HVAC technicians or qualified service personnel. Always set the system thermostat to off and shut down the air handler or furnace at the disconnect or breaker before removing the existing filter. Slide the new filter into the rack with the airflow arrow on the frame pointing toward the blower. Verify a snug fit with no bypass gaps around the filter edges before restoring power.