Nordic Pure 12_1/8x15x1CustomM7+C-6 Merv 7 Plus Carbon Filter

Product Description

The NORDIC PURE 12_1/8x15x1CustomM7+C-6 is a custom-cut, pleated MERV 7 plus carbon air filter sold in a 6-pack. It is designed for residential and light-commercial HVAC systems, including forced-air furnaces and central air conditioning units. The filter combines a MERV 7 synthetic media layer with an activated carbon layer to capture particulates and reduce odors in a single pass. Each filter has an actual size of 12 x 15 x 0.75 inches. The reinforced two-part frame supports consistent airflow and structural integrity across the full service life. HVAC technicians and service pros install these during routine filter changes.

This filter is appropriate for residential forced-air furnace and central AC applications where the return-air opening requires a non-standard nominal size. Because each unit is custom-fabricated to the exact dimensions listed, it is suited for installations where no standard off-the-shelf filter matches the opening. MERV 7 filtration captures 50 to 70 percent of airborne particles between 3 and 10 microns, including lint, dust, pollen, pet dander, mold spores, and odor-causing particles. Nordic Pure recommends replacing 1-inch filters every 30 to 90 days depending on environmental conditions and system load.

Key Features

• MERV 7 plus activated carbon media captures particulates and reduces airborne odors in one filter
• Custom-fabricated to exact listed dimensions - actual size 12 x 15 x 0.75 inches
• Reinforced two-part frame provides added structural durability and balanced airflow support
• Captures 50 to 70 percent of airborne particles in the 3 to 10 micron range, including pollen, pet dander, dust, and mold spores
• Sold as a 6-pack to reduce service call frequency
• Made in the USA

Compatibility

Custom-fabricated for HVAC systems requiring a nominal 12-1/8 x 15 x 1 inch filter opening. Verify actual filter slot dimensions with a tape measure before ordering. This custom size is not interchangeable with standard off-the-shelf filters. Measure the existing filter or the filter slot carefully, as the actual media size is 12 x 15 x 0.75 inches.

Installation Notes

Filter replacement is performed by HVAC technicians or qualified service professionals. Power down the air handler or furnace at the disconnect or thermostat before removing the existing filter. Confirm airflow direction and insert the new filter with the airflow arrow pointing toward the blower. Because this is a custom size, verify measurements to the nearest 1/8 inch before ordering, as custom filters are non-returnable once fabricated.