Nordic Pure 11x32_1/2x1ExactCustomM8+C-6 Merv 8 Filter 6pk

Product Description

The NORDIC PURE 11x32_1/2x1ExactCustomM8+C-6 is a custom-cut, MERV 8 pleated carbon air filter designed for residential and light-commercial HVAC systems. It ships as a 6-pack with an actual size of 11 x 32.5 x 0.75 inches, built to exact dimensions so the filter seats flush without gaps. The activated carbon layer addresses common household odors while the pleated media captures particles in the 3-10 micron range at a 70-85% efficiency rate. Licensed HVAC technicians and experienced service pros install this filter in forced-air furnaces and central air-conditioning systems that require a non-standard frame size.

This filter is intended for HVAC applications where a standard catalog size does not fit the existing filter slot. The custom dimensions are produced by cutting down or combining standard filter frames, with tape-sealed edges where required by the size. It suits residential forced-air gas or electric furnaces, air handlers, and split-system air conditioners that draw return air through a filter rack. Because this is a 1-inch-depth filter, replacement intervals of 30-90 days are typical depending on household dust load, pet presence, and local air quality conditions.

Key Features

• MERV 8 media captures 70-85% of airborne particles between 3-10 microns, including lint, dust, pollen, pet dander, and mold spores
• Activated carbon layer reduces common household odors alongside standard particulate filtration
• Custom-cut to exact nominal dimensions of 11 x 32.5 x 0.75 inches for a flush, gap-free fit in non-standard filter slots
• Reinforced 2-part frame construction increases rigidity and supports consistent airflow across the filter face
• Packed 6 filters per box, supporting multiple replacement cycles on a single order
• Made in the USA

Compatibility

Custom-made to the exact dimensions listed for forced-air furnaces and air handlers requiring a non-standard filter slot measuring 11 x 32.5 x 0.75 inches. Verify actual slot dimensions with a tape measure before ordering. The actual width and length of the installed filter should be within 0.125 inches of the slot opening.

Installation Notes

Installation is performed by a licensed HVAC technician or qualified service professional. Power down the furnace or air handler at the disconnect or thermostat before removing the old filter. Note airflow-direction arrows on the filter frame and orient the replacement to match. Because this is a custom-fabricated filter, it is non-returnable once ordered; confirm exact slot measurements prior to placing the order.