Nordic Pure 11x32_1/2x1ExactCustomM7+C-6 Merv 7 Carbon Filter

Product Description

The NORDIC PURE 11x32_1/2x1ExactCustomM7+C-6 is a custom-made, 1-inch pleated carbon air filter with a MERV 7 plus carbon rating, sold in a pack of six. It is built to exact dimensions - actual size 11 x 32.5 x 0.75 inches - and is not a nominal-size product. The carbon layer addresses common household odors while the MERV 7 media captures lint, dust, pollen, pet dander, and mold spores in the 3-10 micron range at a 50-70 percent capture rate. HVAC technicians and knowledgeable homeowners install this filter in residential forced-air furnaces and air conditioning systems that require a non-standard filter opening.

This filter is intended for residential furnace and air conditioning applications where a standard nominal size does not fit the filter cabinet. Because it is custom-fabricated by cutting down or combining standard filter frames - and may incorporate tape in construction depending on final dimensions - it is essential to measure the existing filter opening to the nearest 1/8 inch before ordering. Nordic Pure recommends replacing 1-inch filters every 30 to 90 days depending on household conditions such as pets, dust load, and local air quality.

Key Features

• Custom exact-fit dimensions: 11 x 32.5 x 0.75 inches actual size - made to order for non-standard openings
• MERV 7 pleated media captures particles in the 3-10 micron range including dust, pollen, pet dander, and mold spores
• Activated carbon layer reduces common airborne odors without blocking airflow
• Reinforced 2-part frame designed for structural durability and consistent airflow support
• Made in the USA
• Pack of 6 filters

Compatibility

Designed as a custom exact-fit replacement for residential forced-air furnace and air conditioning filter cabinets requiring an actual filter size of 11 x 32.5 x 0.75 inches. Not interchangeable with standard nominal-size filters.

Installation Notes

Installation is performed by HVAC technicians or qualified homeowners. Power down the furnace or air handler at the disconnect or thermostat before removing the existing filter. Verify the actual cabinet opening dimensions to the nearest 1/8 inch before installing - do not force a filter into an undersized opening, as frame damage will compromise the air seal. Because this is a custom-fabricated product, it is not eligible for return; confirm dimensions before ordering.