Nordic Pure 11x32_1/2x1ExactCustomM14-6 Merv 14 Filter 6pk

Product Description

The NORDIC PURE 11x32_1/2x1ExactCustomM14-6 is a custom-cut, pleated AC furnace air filter rated MERV 14, sized at an exact 11 x 32.5 x 0.75 inches and sold in a 6-pack. MERV 14 filtration captures over 90% of airborne particles between 1 and 10 microns, and between 75% and 95% of particles from 0.3 to 1 micron. Targeted contaminants include lint, dust, pollen, pet dander, mold spores, smoke, bacteria, virus carriers, and smog. The filter media is electrostatically charged to attract particles and is manufactured using a heavy-duty, moisture-resistant beverage board frame. This rating is comparable to MPR 2800 filters and follows ASHRAE filtration standards.

This filter is designed for residential and light commercial HVAC systems requiring a precise custom size that standard nominal dimensions cannot fill. Because MERV 14 carries higher airflow resistance than lower-rated filters, it is best suited for newer, high-efficiency systems rated to handle MERV 14 or higher. This includes systems that typically operate with HEPA-style filtration. Filter replacement every 1 to 3 months is recommended, with more frequent changes advised in homes with pets or allergy sufferers. Custom sizing makes this filter appropriate for units where off-the-shelf sizes do not seat correctly.

Key Features

• MERV 14 rated per ASHRAE standards, comparable to MPR 2800 efficiency
• Captures over 90% of particles from 1 to 10 microns and 75% to 95% of particles from 0.3 to 1 micron
• Electrostatically charged media resists bacteria and mold growth on the filter surface
• Heavy-duty, moisture-resistant beverage board frame with reinforced 2-part construction for durability
• Custom-made to exact dimensions of 11 x 32.5 x 0.75 inches - not returnable once produced
• Made in the USA

Compatibility

Custom-made for HVAC systems requiring an exact filter size of 11 x 32.5 x 0.75 inches. Suitable for residential and light commercial forced-air furnace and AC systems rated to accept MERV 14 filtration or higher. Verify your system can handle elevated airflow restriction before installing MERV 14 filters.

Installation Notes

Installation is typically performed by HVAC technicians or knowledgeable homeowners. Power down the HVAC system at the thermostat or disconnect before replacing the filter. Confirm airflow direction by matching the arrow on the filter frame to the direction of airflow into the unit. Because this is a custom size, measure the existing filter slot carefully before ordering - actual size, not nominal size, determines correct fit.