Nordic Pure 10x20x2M10-3 Pleated Air Filter Merv 10 3 Pack

Product Description

The NORDIC PURE 10x20x2M10-3 is a three-pack of pleated MERV 10 air filters sized 10x20x2 nominal, with actual dimensions of 9.5 x 19.5 x 1.75 inches. Rated at MERV 10 per ASHRAE standards - equivalent to MPR 1000 - these filters capture pollen, dust, pet dander, mold spores, smoke particles, bacteria, virus carriers, and other airborne contaminants. The filter media is electrostatically charged, hypoallergenic, and antimicrobial, and will not promote bacterial or mold growth on the media surface. The heavy-duty beverage board frame is moisture resistant. Designed for residential and light commercial forced-air HVAC systems, these filters are installed by HVAC technicians and knowledgeable end users performing routine maintenance.

This filter fits forced-air furnace and air conditioning systems that require a 10x20x2 nominal filter slot. It is suited for residential and commercial environments where mid-range particulate filtration is needed, including homes with pets or occupants with mild allergies. MERV 10 filtration provides meaningful improvement over fiberglass and lower-MERV panel filters. Replacement interval is typically every one to three months, though higher-dust or pet environments may require more frequent changes. Each pack contains three filters.

Key Features

• MERV 10 rated per ASHRAE standards, equivalent to MPR 1000
• Electrostatically charged, hypoallergenic, and antimicrobial pleated media
• Captures pollen, smoke particles, pet dander, bacteria, mold spores, and virus carriers
• Moisture-resistant heavy-duty beverage board frame
• Media will not promote bacterial or mold growth on the filter surface
• Made in the USA

Compatibility

Designed for forced-air furnace and air conditioning systems requiring a 10x20x2 nominal filter. Verify fit using the actual size of 9.5 x 19.5 x 1.75 inches, as nominal and actual dimensions differ on nearly all air filters.

Installation Notes

Always shut down the HVAC system at the thermostat and, where applicable, at the disconnect before removing or installing an air filter. Note the airflow direction arrow printed on the filter frame and orient the filter so the arrow points toward the blower. Inspect the filter slot and housing seal to ensure no air bypasses the filter media. Follow local codes and manufacturer service intervals for replacement frequency.