Nordic Pure 10x15x1CustomM13+C-6 Merv 13 Carbon Filter 6pk

Product Description

The NORDIC PURE 10x15x1CustomM13+C-6 is a custom-cut MERV 13 plus carbon pleated air filter designed for residential and light-commercial HVAC systems. It uses electrostatically charged synthetic filter media combined with an activated carbon layer to capture fine particulates and reduce common household odors in a single pass. With a nominal size of 10x15x1 inches and an actual size of 9.5 x 14.5 x 0.75 inches, this filter ships as a six-pack. MERV 13 filtration captures over 90 percent of airborne particles between 1 and 10 microns, and 50 to 70 percent of particles between 0.3 and 1 microns, including pollen, pet dander, mold spores, smoke, bacteria, and virus carriers. The reinforced two-part frame supports consistent airflow and structural integrity over the filter's service life.

This filter is suited for forced-air furnace and central air conditioning systems requiring a custom non-standard filter size. It fits return-air grilles and filter cabinets where a 10x15x1 nominal slot is specified but a standard off-the-shelf size does not fit. HVAC technicians and homeowners replacing filters in custom-framed or non-standard air handler installations will find this filter appropriate. Nordic Pure recommends replacing the filter every 30 to 90 days depending on indoor air quality conditions, occupancy, and the presence of pets or allergen sources in the space.

Key Features

• MERV 13 rating captures over 90 percent of particles from 1 to 10 microns, including dust, pollen, pet dander, mold spores, smoke, and bacteria
• Activated carbon layer addresses common household odors in addition to particulate filtration
• Electrostatically charged synthetic media maintains low airflow resistance to support HVAC system efficiency
• Reinforced two-part frame construction provides added durability compared to single-frame designs
• Custom-cut to nominal 10x15x1 inches with actual dimensions of 9.5 x 14.5 x 0.75 inches
• Made in the USA

Compatibility

Custom-made to fit forced-air furnace and central AC filter slots with a nominal 10x15x1 inch opening. Because this is a custom size, buyers should measure the actual opening of their current filter slot before ordering. This item is non-returnable as a custom-manufactured product.

Installation Notes

Filter installation is typically performed by HVAC technicians or knowledgeable homeowners. Always power down the furnace or air handler at the thermostat and disconnect power at the service switch before removing the old filter. Confirm airflow direction arrows on the filter frame align with the direction of airflow toward the blower. Because this is a custom size, verify the actual slot dimensions with a tape measure before installation to ensure a proper fit without gaps.