Nordic Pure 10x10x1M14-24 Pleated Air Filter Merv 14

Product Description

The NORDIC PURE 10x10x1M14-24 is a MERV 14 pleated air filter sold in a 24-pack, sized at a nominal 10x10x1 inches with an actual size of 9.5 x 9.5 x 0.75 inches. Designed for forced-air HVAC systems in both residential and light commercial settings, this filter captures airborne contaminants including dust, pollen, mold spores, pet dander, smoke particles, bacteria, and dust mite debris. The electrostatically charged, hypoallergenic filter media provides high-efficiency filtration without promoting mold or bacterial growth on the media itself. A moisture-resistant beverage board frame adds structural durability through the full service life of the filter. Installation is straightforward and suited for HVAC technicians and knowledgeable DIYers alike.

This filter is rated for residential and commercial HVAC applications where air quality is a priority, including environments with allergy sufferers, pet owners, or occupants sensitive to airborne particulates. MERV 14 filtration is equivalent to MPR 2800 on manufacturer proprietary rating scales. Because MERV 14 filters restrict airflow more than lower-rated media, the HVAC system must be rated to handle MERV 14 or higher. This filter is well-suited to newer, high-efficiency systems designed to accommodate dense filter media. Regular replacement every one to three months is recommended, with more frequent changes in homes with pets or high dust loads.

Key Features

• MERV 14 filtration captures dust, pollen, mold spores, pet dander, smoke, bacteria, and dust mite debris
• Electrostatically charged, hypoallergenic, antimicrobial media resists mold and bacterial growth on the filter surface
• Moisture-resistant beverage board frame maintains structural integrity in humid operating conditions
• MERV 14 rating is equivalent to MPR 2800 per ASHRAE standard methodology
• Actual size 9.5 x 9.5 x 0.75 inches - measure existing filter before ordering to confirm fit
• Made in the USA; sold as a 24-pack for extended service intervals or multi-unit installations

Compatibility

Designed as a MERV 14 replacement filter for forced-air furnaces, air handlers, and central AC systems with a nominal 10x10x1 inch filter slot that are rated to accept filters of MERV 14 or higher. Confirm actual filter cavity dimensions against the stated actual size of 9.5 x 9.5 x 0.75 inches before installation.

Installation Notes

Installation is performed by licensed HVAC technicians or qualified service personnel. Power down or set the thermostat to off before removing the existing filter to prevent unfiltered air from circulating through the system during changeout. Note airflow direction arrow on the filter frame and orient the replacement filter accordingly. Because MERV 14 media restricts airflow more than standard filters, verify the system blower and ductwork are rated for high-MERV operation before installing; using a filter rating above system design limits can reduce airflow and stress heat exchangers or coils.