Nibco nf99kh8 3/4 in Lead Free Brass Ball Valve Press X Hose

Product Description

The NIBCO nf99kh8 is a full port, lead-free brass ball valve designed for press-to-connect copper piping systems. It ships with a hose cap and retainer attached to the valve body. The valve uses press female connections with an inboard bead and EPDM O-ring that compress onto the tube when a press-fit tool is applied, forming a watertight, permanent seal without flame, solder, or flux. The body is manufactured from a dezincification-resistant (DZR) lead-free brass alloy. Rated to 250 psi non-shock cold working pressure with a maximum service temperature of 250 degrees F, this valve suits demanding residential and light commercial plumbing applications.

This valve is intended for copper-to-copper press systems in residential and commercial plumbing installations. The press x hose end configuration makes it well suited for hose bib and equipment isolation points within cold and hot water distribution lines. A licensed plumber or pipefitter typically installs this valve where quick, flame-free joinery is required, such as occupied buildings or areas with fire restrictions. The included hose cap and retainer provide an immediate, ready-to-use assembly straight out of the package. This valve is not intended for gas service.

Key Features

• Lead-free, dezincification-resistant (DZR) brass body for corrosion resistance in potable water service
• Press-to-connect female x hose end connections with EPDM O-ring for flame-free, solder-free installation
• Full port design minimizes flow restriction through the valve
• Blowout-proof stem construction for long-term safety and reliability
• Reinforced PTFE seat rings for durable, low-torque operation
• Press leak-detection feature allows verification of proper connection before system pressurization
• Hose cap and retainer included, attached to valve at time of shipment

Compatibility

Designed for use with copper press piping systems at 3/4 inches. Conforms to MSS SP-145 and is certified to NSF/ANSI/CAN-61 and 372 for potable water contact, and listed under IAPMO/ANSI Z1157 (IGC 157). Not intended for gas use.

Installation Notes

Installation should be performed by a licensed plumber or qualified pipefitter familiar with press-fit systems. Shut off the water supply and relieve system pressure before installing or servicing this valve. A compatible press-fit tool with the correct jaw size for 3/4 inches copper is required to achieve a proper seal. Consult applicable local plumbing codes, IPC, and NSF certification requirements before installation in potable water systems.

WARNING: This product can expose you to chemicals including lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.