Nibco CD03860 Pvdf Threaded Pipe Nipple Sch 80 1x6 in

Product Description

The NIBCO CD03860 is a Schedule 80 PVDF threaded pipe nipple designed for demanding fluid handling applications where chemical resistance and pressure integrity are critical. Measuring 1 inch in diameter and 6 inches in length, this nipple is molded from polyvinylidene fluoride (PVDF), a high-performance thermoplastic that resists a broad range of aggressive chemicals, high-purity fluids, and elevated temperatures. The red color provides quick visual identification, a common practice in industrial piping systems for distinguishing line types or chemical service. Licensed plumbers and industrial pipefitters install this type of component in chemical process, water treatment, and high-purity fluid systems.

This nipple is suited for Schedule 80 plastic piping systems where standard metal nipples would corrode or contaminate the process fluid. Typical installations include chemical feed lines, semiconductor fabrication facilities, water treatment plants, and laboratory plumbing where PVDF-rated fittings are specified. The threaded ends accept standard NPT female fittings and valves in the same schedule and material class. Its compact 6-inch length makes it practical for close-coupled connections and tight equipment installations.

Key Features

• PVDF construction provides excellent resistance to acids, bases, and solvents
• Schedule 80 wall thickness rated for higher pressure service than Schedule 40
• Threaded ends for tool-based assembly with compatible NPT fittings
• Red color coding supports visual line identification in multi-service systems
• Lightweight at 0.249 pounds, reducing load on connected equipment and fittings

Compatibility

Designed as an OEM-style replacement or new-installation component for Schedule 80 PVDF threaded piping systems using 1-inch NPT connections.

Installation Notes

Installation should be performed by a licensed plumber or qualified pipefitter familiar with plastic threaded piping systems. Depressurize and drain the line completely before removing any existing fittings. Use PTFE thread tape or a PVDF-compatible thread sealant on all threaded joints and tighten by hand first, then with a strap wrench to avoid cracking the fitting body. Do not use pipe wrenches directly on PVDF fittings and do not over-torque, as thermoplastic threads are not rated for the same makeup force as metal pipe.