Newage Industries 2800854-100 Silicone Tube 9/32 in Od

Product Description

The NEWAGE INDUSTRIES 2800854-100 is a flexible silicone tube rated for demanding fluid transfer and pneumatic applications where temperature resistance and food-safety compliance are required. With a 9/32-inch outside diameter, a 5/32-inch inside diameter, and a 1/16-inch wall thickness, this tube handles maximum working pressures up to 20 psi and continuous service temperatures up to 500 degrees F. The natural-color silicone construction meets FDA 21 CFR 177.2600, NSF, and RoHS standards, making it suitable for direct food-contact installations. It is typically installed by plumbers, HVAC technicians, food equipment service technicians, and laboratory professionals.

This silicone tube is suited for residential and commercial applications involving food processing equipment, beverage dispensing lines, laboratory fluid transfer, and low-pressure pneumatic or vacuum lines. The flexible Shore 50A durometer allows for easy routing around tight bends without kinking. The coil is sold in 1-foot increments with a 25-foot minimum cut length and is supplied on a 100-foot total coil. Applications requiring FDA-compliant tubing in sanitary or food-contact environments are the primary use case for this product.

Key Features

• FDA 21 CFR 177.2600 compliant - approved for food-contact surface use
• NSF and RoHS certified for sanitary and environmental compliance
• Rated to 500 degrees F continuous service temperature
• 20 psi maximum working pressure
• Shore 50A hardness for flexible, kink-resistant routing
• Sold in 1-foot increments from a 100-foot coil (25-foot minimum cut length)

Compatibility

Designed for use with food contact surfaces and compatible with low-pressure fluid transfer and pneumatic systems requiring FDA-compliant, flexible silicone tubing in 9/32-inch OD sizing.

Installation Notes

This tubing is typically installed by plumbers, food equipment technicians, or laboratory maintenance professionals. Ensure all system pressure is relieved and fluid supply is shut off before cutting or connecting the tube. Use a clean, sharp blade to make flush, square cuts for proper barb or fitting engagement. Verify that all fittings and clamps are rated for silicone tubing and are compatible with the intended media and temperature range.